This gusset kit is designed to fit the profile of the upper portion of the front JK Dana 30 or 44 knuckle in a way that increases the strength of the knuckle in the weakest area. Its simple but very effective.
The JK Axle Sleeve and Gusset kit is designed to reinforce the weak axle tubing and knuckles on JK Dana 30 or 44 factory axles. The sleeves are designed to slide inside the factory tubes and provide increased durability and support throughout the axle.
The JK Axle Sleeve Kit was created as a way to reinforce the weak factory axle tubing. The sleeves are designed to slide inside the factory tubes and provide increased durability and support throughout the axle. This prevents unwanted bending or breaking under extreme conditions.
The U-bolt conversion kit replaces the yoke and changes the OEM strap/nut with a stronger U-bolt style connector. The conversion is not only stronger but makes u-joint changes easier after breakages.
The 2Low shift kit is designed similar to our popular 2Low for the 231 transfer case. This shifter will allow the 241OR case to have one more low range position for true 2WD Low Range to allow for tighter turning, easier front steering, and will help to eliminate any unnecessary drivetrain binding.
TeraFlex driveshafts are designed as replacements to the factory for the rigors of off roading and for daily driving responsibilities. They come pre-balanced and feature high quality u-joints.
Jeep Parts & Jeep Accessories Take your Jeep to the next level with the parts found on our site. We are a leading Jeep accessories retailer, providing performance products for our customers. We work hard to give you the best information to turn your vehicle into a top-notch ride. Whether you are looking for 4wd suspension parts & accessories or want improved Jeep performance, we have the parts & Jeep accessories you need.
The terms Quadratec and Essentials are Registered Trademarks of Quadratec Incorporated, Registered in U.S. Patent and Trademark Office. All manufacturers names, numbers, symbols and descriptions are used for reference purposes only, and it is not implied that any part listed is the product of these manufacturers or approved by any of these manufacturers.
*Jeep, Wrangler, Rubicon, Renegade, CJ, Quadra-Trac and the Jeep Grille Design are registered trademarks of Chrysler LLC. Quadratec, Inc, has no affiliation with Chrysler LLC. Throughout this website and catalog the terms Jeep, Wrangler, MOPAR®, & Rubicon are used for identification purposes only. Geo is a registered trademark and Tracker is a registered trademark of the General Motors Company. Sidekick and Samurai are trademarks of Suzuki Motor Corporation. Amigo is a product of Isuzu Motors Limited. Chevrolet, the Chevrolet Emblem, S Series, GMC, GMC Truck, Chevy, Vortec and Sonoma are registered trademarks of the General Motors Company. Expedition, F-Series, F-150, F-250, F-350, Super Duty and Flare Side are registered trademarks of the Ford Motor Company. All other marks, names, and logos mentioned on this web site are the property of their respective owners.
Throughout this web site all the preceding marks & logos are used for identification purposes only. Quadratec has no affiliation with the Chrysler LLC, MOPAR®, General Motors Company, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited. It is not implied that any part listed is a product of, or approved by Chrysler LLC, General Motors Company, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited.
Quadratec, Inc. is sometimes mis-searched as Quadartec and Quadratech, we have no affiliation with either.
