OMIX 17234.25 Multi-Function Switch for 07-18 Jeep Wrangler JK with Fog Lights
Quadratec Part #:
55312-0016
OMIX Part #:
17234.25
Description
The Omix Multi-Function Switch replaces a malfunctioning unit from the factory in your JK Wrangler. For Jeeps with factory installed fog lights, this switch pack plugs into the top of the steering column and controls various functions of your lighting, so if you have noticed intermittent issues with your headlights, fog lights or turn signals you may have a bad multi-switch. Please note, this cannot add fog light functions to un-equipped vehicles.
Details
- Features: Plastic
- Color: Black
- Shipping Weight: 0.8lb
- Shipping Dimensions: 11in x 7in x 4in (L x W x H)
Jeep Wrangler 2-Door (JK)
- 2018 Jeep Wrangler 2-Door (JK)
- 2017 Jeep Wrangler 2-Door (JK)
- 2016 Jeep Wrangler 2-Door (JK)
- 2015 Jeep Wrangler 2-Door (JK)
- 2014 Jeep Wrangler 2-Door (JK)
- 2013 Jeep Wrangler 2-Door (JK)
- 2012 Jeep Wrangler 2-Door (JK)
- 2011 Jeep Wrangler 2-Door (JK)
- 2010 Jeep Wrangler 2-Door (JK)
- 2009 Jeep Wrangler 2-Door (JK)
- 2008 Jeep Wrangler 2-Door (JK)
- 2007 Jeep Wrangler 2-Door (JK)
Jeep Wrangler Unlimited 4-Door (JK)
- 2018 Jeep Wrangler Unlimited 4-Door (JK)
- 2017 Jeep Wrangler Unlimited 4-Door (JK)
- 2016 Jeep Wrangler Unlimited 4-Door (JK)
- 2015 Jeep Wrangler Unlimited 4-Door (JK)
- 2014 Jeep Wrangler Unlimited 4-Door (JK)
- 2013 Jeep Wrangler Unlimited 4-Door (JK)
- 2012 Jeep Wrangler Unlimited 4-Door (JK)
- 2011 Jeep Wrangler Unlimited 4-Door (JK)
- 2010 Jeep Wrangler Unlimited 4-Door (JK)
- 2009 Jeep Wrangler Unlimited 4-Door (JK)
- 2008 Jeep Wrangler Unlimited 4-Door (JK)
- 2007 Jeep Wrangler Unlimited 4-Door (JK)
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
OMIX Multi-Function Switch Reviews
Kevin S.
6/24/2022
Mine broke, needed a new one
Fareed S.
1/14/2022
Works! My dash lights no longer randomly flicker and my back seat passenger light works again, so I'm happy. I also don't have to turn on my signal when i exit the vehicle to prevent flickering and dead battery. The OEM one was pretty fried.
Would have taken me about 15 mins altogether, but the 4 wire plug tabs for the back harness needed to be adjusted. I used the t20 move them. Hard to tell if they need to be moved up or down, so just had to do trial and error until it locked into place.
STEPHEN P.
9/30/2021
5 min install turnsignal function seems a little tight but everything works as it should