These heavy duty Chromoly stub shafts are designed as stock replacements with increased strength through superior materials and design. Must use 5-760X U-joint size.
G2 aluminum differential covers are manufactured from Heat Treated Aluminum, and are designed to dissipate heat while withstanding the rigors of the off road environment... more
All new! Bolt-in RockJock high pinion 60 rearend for Jeep's. Package includes the complete housing featuring the new RockJock III ductile iron housing center (highest ground clearance 60 on the market), AR400 heat treated bottom skid plate allowing the axle to slide over rocks easily, 3" d.o.m... more
This kit features forged flanged axles that replace the traditional two piece axles found in early Jeeps that tend to fail. Kit also includes Timken tapered wheel bearings, seals and screw in wheel studs... more
G2 aluminum differential covers are manufactured from Heat Treated Aluminum, and are designed to dissipate heat while withstanding the rigors of the off road environment... more
G2 Master Installation Kits are designed to provide all necessary parts to install your ring and pinion, including Ring Gear Bolts, Shims, Crush Sleeve or Spacer, Pinion Seal, Pinion Nut, Gasket or RTV Silicone and Tapered Roller Bearings where applicable.
G2 complete axle assemblies are built to make upgrading easier, and are ready to bolt directly into a Jeep TJ. They are assembled using the finest components including OEM ring & pinion sets and heavy duty chromoly axles... more
G2 aluminum differential covers are manufactured from Heat Treated Aluminum, and are designed to dissipate heat while withstanding the rigors of the off road environment... more
G2 Master Installation Kits are designed to provide all necessary parts to install your ring and pinion, including Ring Gear Bolts, Shims, Crush Sleeve or Spacer, Pinion Seal, Pinion Nut, Gasket or RTV Silicone and Tapered Roller Bearings where applicable.
G2 Master Installation Kits are designed to provide all necessary parts to install your ring and pinion, including Ring Gear Bolts, Shims, Crush Sleeve or Spacer, Pinion Seal, Pinion Nut, Gasket or RTV Silicone and Tapered Roller Bearings where applicable.
This kit features forged flanged axles that replace the traditional two piece axles found in early Jeeps that tend to fail. Kit also includes Timken tapered wheel bearings, seals and screw in wheel studs... more
G2 Offers a full line of internal kits to replace worn or damaged gears. Kits come complete with side and spider gears, cross shaft,thrust washers and retaining pin... more
G2 Axle & Gear offers a 30 spline upgrade for the 27 spline Dana 35 axles. This kit allows you to run larger tires without the worry of failed or broken axle shafts... more
Jeep Parts & Jeep Accessories Take your Jeep to the next level with the parts found on our site. We are a leading Jeep accessories retailer, providing performance products for our customers. We work hard to give you the best information to turn your vehicle into a top-notch ride. Whether you are looking for 4wd suspension parts & accessories or want improved Jeep performance, we have the parts & Jeep accessories you need.
The terms Quadratec and Essentials are Registered Trademarks of Quadratec Incorporated, Registered in U.S. Patent and Trademark Office. All manufacturers names, numbers, symbols and descriptions are used for reference purposes only, and it is not implied that any part listed is the product of these manufacturers or approved by any of these manufacturers.
*Jeep, Wrangler, Rubicon, Renegade, CJ, Quadra-Trac and the Jeep Grille Design are registered trademarks of Chrysler LLC. Quadratec, Inc, has no affiliation with Chrysler LLC. Throughout this website and catalog the terms Jeep, Wrangler, MOPAR®, & Rubicon are used for identification purposes only. Geo is a registered trademark and Tracker is a registered trademark of the General Motors Company. Sidekick and Samurai are trademarks of Suzuki Motor Corporation. Amigo is a product of Isuzu Motors Limited. Chevrolet, the Chevrolet Emblem, S Series, GMC, GMC Truck, Chevy, Vortec and Sonoma are registered trademarks of the General Motors Company. Expedition, F-Series, F-150, F-250, F-350, Super Duty and Flare Side are registered trademarks of the Ford Motor Company. All other marks, names, and logos mentioned on this web site are the property of their respective owners.
Throughout this web site all the preceding marks & logos are used for identification purposes only. Quadratec has no affiliation with the Chrysler LLC, MOPAR®, General Motors Company, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited. It is not implied that any part listed is a product of, or approved by Chrysler LLC, General Motors Company, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited.
Quadratec, Inc. is sometimes mis-searched as Quadartec and Quadratech, we have no affiliation with either. [5]
