The aFe Mach Force XP Jeep "Y-pipe" is designed to connect the stock converter with either the stock exhaust or aFe's Mach FORCE XP exhaust system... more
aFe exhaust systems are manufactured in-house to the highest engineering standards for performance and quality. All tubing is 100% mandrel-bent to provide the highest flow possible... more
This aFe exhaust system features aFe's Hi-Tuck Design for extra ground clearance when using an aftermarket suspension kit. This system is constructed out of 409 stainless steel for corrosion resistance and durability... more
This MACH Force XP Cat-Back exhaust system is constructed of 2.5" mandrel-bent 409 stainless steel and comes complete with free-flowing muffler, tubing, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation... more
This Silver Bullet throttle body spacer produces 6hp and 14lbs. x ft. torque and is constructed from precision machined T-6061 billet aluminum and is designed using a serrated/helix design that creates turbulence in the air flow at the point just prior entry into the engine optimizing the combustion cycle... more
The aFe Stage 2 cold air intake for the 3.6L Wrangler outflows the factory intake system for maximum performance gains. This intake utilizes a highly engineered heat-shielded and a one-piece intake tube.The one-piece heat-insulating, black powder-coated aluminum intake tube is engineered for improved volumetric efficiency and maximum performance while lowering Intake Air Temps (I.A.T)... more
The aFe Stage 2 cold air intake for the 2012 Jeep Wrangler outflows the factory intake system by 48% for maximum performance gains of 12hp and 13lbs... more
The aFe Stage 2 cold air intake for the 2012 Jeep Wrangler outflows the factory intake system by 48% for maximum performance gains of 12hp and 13lbs... more
This intake system produces 8hp and 12lbs. x ft. torque and outflows the factory intake by 97%. Enclosed in a durable 16 gauge, powder-coated heat shield; this air intake system features a washable/reusable conical air filter that improves airflow for increased horsepower and torque... more
We suggest that your aFe filter be cleaned every 30,000-50,000 miles. If, however, you're driving in dusty and dirty conditions, you should clean it more often.
We suggest that your aFe filter be cleaned every 30,000-50,000 miles. If, however, you're driving in dusty and dirty conditions, you should clean it more often.
Airflow and volumetric efficency mean huge high-flow conical air filters are the first step to increase airflow to the engine. Steel heat shields or molded plastic air boxes keep hot air out and fresh, cold air flowing to the filter... more
Pro Dry S filters use a revolutionary two-ply synthetic material that is functionally superior to traditional paper media and single-ply synthetic, and easy to service... more
aFe Power’s new Twisted Steel header delivers an astounding 8hp and 8lbs. x ft. torque while out flowing the factory exhaust manifold. The header is constructed of 1.5” 14-gauge 409 SS tubing with a 1/2” thick head flange to ensure a leak free seal... more
aFe Power’s new Twisted Steel header delivers an astounding 7hp and 9lbs. x ft. torque while out flowing the factory exhaust manifold. The header is constructed of 1.5” 14-gauge 409 SS tubing with a 1/2” thick head flange to ensure a leak free seal... more
Jeep Parts & Jeep Accessories Take your Jeep to the next level with the parts found on our site. We are a leading Jeep accessories retailer, providing performance products for our customers. We work hard to give you the best information to turn your vehicle into a top-notch ride. Whether you are looking for 4wd suspension parts & accessories or want improved Jeep performance, we have the parts & Jeep accessories you need.
The terms Quadratec and Essentials are Registered Trademarks of Quadratec Incorporated, Registered in U.S. Patent and Trademark Office. All manufacturers names, numbers, symbols and descriptions are used for reference purposes only, and it is not implied that any part listed is the product of these manufacturers or approved by any of these manufacturers.
*Jeep, Wrangler, Rubicon, Renegade, CJ, Quadra-Trac and the Jeep Grille Design are registered trademarks of Chrysler LLC. Quadratec, Inc, has no affiliation with Chrysler LLC. Throughout this website and catalog the terms Jeep, Wrangler, MOPAR®, & Rubicon are used for identification purposes only. Geo is a registered trademark and Tracker is a registered trademark of the General Motors Company. Sidekick and Samurai are trademarks of Suzuki Motor Corporation. Amigo is a product of Isuzu Motors Limited. Chevrolet, the Chevrolet Emblem, S Series, GMC, GMC Truck, Chevy, Vortec and Sonoma are registered trademarks of the General Motors Company. Expedition, F-Series, F-150, F-250, F-350, Super Duty and Flare Side are registered trademarks of the Ford Motor Company. All other marks, names, and logos mentioned on this web site are the property of their respective owners.
Throughout this web site all the preceding marks & logos are used for identification purposes only. Quadratec has no affiliation with the Chrysler LLC, MOPAR®, General Motors Company, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited. It is not implied that any part listed is a product of, or approved by Chrysler LLC, General Motors Company, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited.
Quadratec, Inc. is sometimes mis-searched as Quadartec and Quadratech, we have no affiliation with either. [5]
