Rear corners have a material thickness of 1/8", and not only provide structural support to the corner area, but enhance the appearance of the vehicle too. To allow easier installation, corners have precut holes for the gas tank and tail light openings. Available in four exterior finishes, these corners are long lasting and durable. Sold in pairs. Note: Rear corners will not fit Renegade and/or Sahara Wrangler trim packages, nor Aftermarket fiberglass bodies.
The original and still by far the best. ARBŐs Rocker Guards utilize strong 1.25" diameter schedule 40 pipe and are designed to offer added protection without decreasing ground clearance. Angled upwards 30 degrees with standoffs that are perpendicular to the bodyside for optimum strength.
Put some thick, 3/16" steel between your gas tank and the rough terrain your Jeep will conquer. The WARN Fuel Tank Skid Plate for the Jeep Wrangler not only adds extreme protection over the stock setup, it bolts directly onto the frame using the existing factory attachment points.
These traditional designs incorporate tough non-slip nylon pads making it easier stepping in and out of your vehicle. Custom engineered to fit specific vehicle applications with easy installation. Features fully welded metal end caps that are ground and polished smooth before final finishing.
Transform your '97-'06 Wrangler in minutes! Installation is fast & easy with high-bond 3M double-sided adhesive tape. Rear Corner & Side Rocker Panels work with either factory or custom styled fender flares. Dura-Flex diamond textured plastic material can be easily custom painted or the attractive UV-protected black finish can be left alone. The Rear Corner Kit features an integrated license plate mount molded directly into itself. Side Rockers have that Rubicon styling look and are sold in pairs. Front Frame Cover features the Bushwacker oval logo and comes with the Rear Tailgate Valence piece. The Hood Protector and Front Fender Guards Set complete this awesome & stylish look all the while protecting your Jeep from dings & dents both on- or off-road!
The off-road suspension experts at Rancho® are pleased to announce the availability of the latest RockGEAR™ accessory for Jeep Wrangler TJ. Bolt-on the performance and protection your TJ needs to conquer the most demanding terrain.
The sway bar on 97-06 Wranglers is located up on top of the chassis leaving the bottom of the radiator exposed. In addition, the factory radiator uses a plastic bottom tank that can be broken leaving you without coolant. This guard is made from 1/8" thick steel and attaches in two places. The body mount under the grill and the passenger side of the chassis. Minor drilling is required for the mount on the passenger side. All hardware is provided. Comes with a Power-coated black finish.
HyLine OffRoad's uniquely designed Side Step Rocker Panels will give your Jeep a great rugged look, but also hold up to aggressive offroad use. Fits 97-06 Wrangler TJ (SWB) models.
Proudly Made 100% In USA.
Doubles as a nerf bar in the up position, and a step for easier, safer entry in the down position. Features a spring loaded retractable step with convenient step pad. Easy installation, with no drilling.
Jeep Parts & Jeep Accessories Take your Jeep to the next level with the parts found on our site. We are a leading Jeep accessories retailer, providing performance products for our customers. We work hard to give you the best information to turn your vehicle into a top-notch ride. Whether you are looking for 4wd suspension parts & accessories or want improved Jeep performance, we have the parts & Jeep accessories you need.
The terms Quadratec and Essentials are Registered Trademarks of Quadratec Incorporated, Registered in U.S. Patent and Trademark Office. All manufacturers names, numbers, symbols and descriptions are used for reference purposes only, and it is not implied that any part listed is the product of these manufacturers or approved by any of these manufacturers.
*Jeep, Wrangler, Rubicon, Renegade, CJ, Quadra-Trac and the Jeep Grille Design are registered trademarks of Chrysler LLC. Quadratec, Inc, has no affiliation with Chrysler LLC. Throughout this website and catalog the terms Jeep, Wrangler, MOPAR®, & Rubicon are used for identification purposes only. Geo is a registered trademark and Tracker is a registered trademark of the General Motors Company. Sidekick and Samurai are trademarks of Suzuki Motor Corporation. Amigo is a product of Isuzu Motors Limited. Chevrolet, the Chevrolet Emblem, S Series, GMC, GMC Truck, Chevy, Vortec and Sonoma are registered trademarks of the General Motors Company. Expedition, F-Series, F-150, F-250, F-350, Super Duty and Flare Side are registered trademarks of the Ford Motor Company. All other marks, names, and logos mentioned on this web site are the property of their respective owners.
Throughout this web site all the preceding marks & logos are used for identification purposes only. Quadratec has no affiliation with the Chrysler LLC, MOPAR®, General Motors Company, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited. It is not implied that any part listed is a product of, or approved by Chrysler LLC, General Motors Company, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited.
Quadratec, Inc. is sometimes mis-searched as Quadartec and Quadratech, we have no affiliation with either. [5]
