Introducing the Quadratec QR3 Tubular Bumper series. Our bumpers feature heavy duty fully welded metal construction with end caps that are ground and polished smooth before final finishing. Most brands use plastic end caps that can crack and fall out leaving unfinished tube ends to rust. Out finished end caps look great while sealing out the moisture that can lead to internal rusting. Our 3" tubular bumpers feature mandrel bends, miter joint cuts, gussets and 360° welds that are ground and polished creating a superior look! The durable powder coat finishes feature e-coatings for corrosion resistance and are available in gloss black or textured black. Powder coat finishes carry a three-year limited warranty while the show polished stainless steel versions carry a limited lifetime warranty. Traditional designs with distinctive styling and are available in three rugged finishes!
When you need a tough and durable "no-nonsense" bumper system, consider the Quadratec QRC Pre Runner style bumper to deliver what you want. The Q9000 provides all of the capability that most enthusiasts will ever need for occasional use on their Wranglers. The winch plate is custom made specifically for the Jeep® Wrangler by Quadratec. Supports winches with the common 10" x 4.5" bottom bolt pattern.
Buy a QR3 Front Tube Bumper, Rear Tube Bumper & get the Side Steps for Free!
Introducing the Quadratec QR3 Tubular Bumper series. Our bumpers feature heavy duty fully welded metal construction with end caps that
are ground and polished smooth before final finishing. Most brands use plastic end caps that can crack and fall out leaving unfinished tube ends to rust... more
Add a whole new look to your ’97-’06 Wrangler
factory bumpers with these replacement solid
rubber Xtreme Bumper End Caps. These easy to
install end caps replace your factory hollow plastic
end caps creating a rock bumper style in just
minutes! Available for the front and rear factory
Unmatched quality, high-tech design and superior durability. The Congo Cage features easy installation with common tools.The high-strength steel Congo Cage is constructed from round 1.625” diameter tubing and can support up to 500 pounds. Hinged rear mounts & easy-release front mounts provide convenient soft top removal and installation... more
This Rock Hard 4x4 top of the line Full Width Front Bumper is made from 1/4" CNC laser cut and bent steel for consistent quality. Provides the best possible approach angle without cutting the factory frame. The winch is mounted low in the bumper without affecting air flow. Bumper provides full width protection... more
This new Body Armor front bumper fits '87-'06 Wrangler YJ and TJ models. It is formed from 3/16" rolled steel plate with an integrated 1/4" thick winch plate. The bumper ends are reinforced along with fully integrated shackle mounts. It also features a bolt steering box skid plate and grille hoop which has built in light tabs... more
The Classic Double Tube Bumpers create a timeless and traditional look that's always in style. Available with or without the ever popular grill guard "Hoop" and manufactured from heavy gauge .090 X 3" diameter steel tubing. The Classic Double Tube Bumpers easily bolt to existing mounting holes with no drilling or other modifications required. Hoop design enhances styling while protecting the vehicle's front end. Made in USA.
The Rampage front bumper features heavy-duty construction and a durable powder coat finish. The 3/16" Steel plate main beam has two 4" light openings for choice of fog or driving lamps. Other features include custom welded shackle mounts with 3/4" D-rings. The center stinger hoop is made from 2" x .120" wall tubing center with flanking 1.5" x .120" wall side protectors. Tapered ends improve approach angle. Accepts most winches. Requires winch mounting plate.
The Rampage Rear Swing Out Tire carrier transfers the load from the tailgate and places it onto the frame mounted bumper. Fully adjustable tire mount system carries up to 35" tall tires and is secured with a heavy-duty latch and hinge mechanism. Rear bumper features a durable powder coat finish and 3/16" thick steel plate construction. The two 4" light openings allow your choice of fog or driving lamps - sold separately. Other features include custom welded shackle mounts with 3/4" D-rings and a non rated 2" receiver hitch. Tapered ends improve approach angle.
Built to withstand heavy offroad use, but also designed for great looks on the street. All front bumpers incorporate tapered ends for increased approach angles and fully welded 5/8" thick steel D-Ring Mounts.
The legendary ARB Bull Bar is highly regarded as one of the best 4x4 front winch bumpers ever developed. ARB pioneered the bull bar for maximum strength and reliability to endure the toughest conditions in Australia's Outback.
ARB Bull Bars offer the quality & protection that you expect, without compromising design or
aesthetics. Each Bull Bar starts with the finest steel materials and use computer-controlled
laser cutting equipment, mandrel bending machines, and MIG welding equipment to shape
the materials into a structurally sound shell. Additional reinforcements and gusseting are
added, as well as steel uprights. Finally, Bull Bars are steel shot blasted, bathed in a phosphate
solution and Powder-coated to ensure a rich, durable finish. When installed, ARB Bull Bars will
act as an integral crossmember designed to spread the impact & winching loads over both
With a stylish, integrated design, the ARB rear bumper & swing out tire carrier will provide increased
protection for the back of your vehicle. This heavy duty bumper not only features a
functional design, it also includes integrated D-Ring mounts and a 2" accessory hitch. The reinforced
corners will help protect your TJ from unwanted corner digs while off-road. The easy
to operate tire carrier can be opened by simply releasing the pull lever. To close, you simply
shut it as you would a car door. This tire swing will accommodate up to a 35" spare. License
plate must be repositioned.
The following parts require additional handling charges due to their large size or
weight: wheels, tires, full suspension lift kits, oversized bumpers, tire carriers, body tubs, hard tops
and cargo racks. The following parts do not qualify for free shipping: Oversized items and items
delivered by truck freight, as well as prior purchases and returns.
Jeep Parts & Jeep Accessories Take your Jeep to the next level with the parts found on our site. We are a leading Jeep accessories retailer, providing performance products for our customers. We work hard to give you the best information to turn your vehicle into a top-notch ride. Whether you are looking for a Jeep lift kit or want improved Jeep engine performance, we have the parts & Jeep accessories you need.
The terms Quadratec, Essentials, QuadraPac, QuadraTop and TACTIK are Registered Trademarks of Quadratec Incorporated, Registered in U.S. Patent and Trademark Office. All manufacturers names, numbers, symbols and descriptions are used for reference purposes only, and it is not implied that any part listed is the product of these manufacturers or approved by any of these manufacturers.
* Jeep, Wrangler, Rubicon, Renegade, CJ, Quadra-Trac and the Jeep Grille Design are registered trademarks of FCA (Fiat Chrysler Automobiles). Quadratec, Inc, has no affiliation with FCA. Throughout this website and catalog the terms Jeep, Wrangler, MOPAR®, & Rubicon are used for identification purposes only. It is not implied that any part listed is a product of, or approved by Fiat Chrysler Automobiles.
** To qualify for FREE shipping the parts on an individual order must meet a combined total value of $49 or more. Customer must select Standard Shipping in the checkout and ship to an address in the contiguous 48 United States. Some parts require additional handling charges due to their large size or weight: including wheels, tires, full suspension lift kits, oversized bumpers, tire carriers, body tubs, hard tops, cargo racks, winches and hitches. Oversized items, items that are delivered by truck freight, prior purchases and returns do not qualify for free shipping.
* Free Shipping Special Offer Details
To qualify for FREE shipping the parts on an individual order must meet a combined total value of $49 or more. Customer must select Standard Shipping in the checkout and ship to an address in the contiguous 48 United States. Some parts require additional handling charges due to their large size or weight: including wheels, tires, full suspension lift kits, oversized bumpers, tire carriers, body tubs, hard tops, cargo racks, winches and hitches. Oversized items, items that are delivered by truck freight, prior purchases and returns do not qualify for free shipping.