Skip to main content
Home » Jeep Engine & Fuel System » Engine Tuning » Hand Held Programmer » AEV ProCal Module
« Back to product
Can i turn off tpms system with this programmer
Yes, though it is suggested only for off-road use. Thanks for your inquiry.
Will this unit allow more than one thing to be programmed at a time? For example, I have 35" tires that I would like to update the speedometer for and I'd also like to change the low tire pressure warning threshold as well.
Each feature will need to programmed at a time. Thanks for your inquiry.
Will this be able to adjust the sluggish shift points on a 2018 Willys JK ?
Any shift point improvement is automatic with the tire size and gear ratio adjustments. You cannot personally tune shift points.
hi, i have jeep wrangler unlimited sport 2.8 crd diesel automatic my2008 (eu market). i want to lift 3.5" and put 35" tires. May I use procal module? regards, juvel
The AEV ProCal cannot change axle gear ratios for 2011+ 2.8L CRD diesel JK Wranglers with manual transmissions. The RESTORE function is not compatible with export JK’s equipped with the 2.8L CRD engine.
I put a backup camera in, can I use this to program so it will recognize that it is in reverse Thru the Rez factory radio.if so what are the code
That would depend on the brand of camera, for usage help please contact our service team at 1-800-745-5337
Will this go up to 37in tires
Yes this will accommodate 37" tires
Besides the benefits does this Module have for a manual transmission? Thanks
This will calibrate tire sizes, clear engine codes, change various headlight and turn signal options.
My sway bar actuator is damaged and looking into going manual on its control. Will this turn of that sway bar light?
No, it will not.
Will this turn off the error message for rear signal light bulbs being out due to LED bulbs that were installed in the rear signal lights?
No, it will not.
Will this damage my vehicles ECI with the installation of this unit or when returning it to stock?
No this is simply a flash unit and the ECU reads directly off the module .