« Back to product
Bran C.
What size D rings to i get for this bumper. I see that some of the pics have them
3/4" D-rings that have a 7/8" size pin. Thanks for your inquiry.
Craig W.
The bumper has two circle lights. What light options are available for these?
Any factory style or LED factory style fog lights should work with this bumper.
Josh S.
Does this number come with d rings?
D-rings are not included with this bumper. Please see the attached link for a set of Smittybilt d-rings.
https://www.quadratec.com/products/92144_20XX_PG.htm
Andrew P.
Do you need to purchase fog light extensions, if you are using factory fog lights?
Yes, fog light extensions are recommended.
https://www.quadratec.com/p/quadratec/18-fog-light-extension-harness-07-17-jeep-wrangler-jk
Kathy D.
Is there a license plate relo for this or separate option ?
Please see winch mounted license plate options in the attached link.
https://www.quadratec.com/categories/winches-recovery/winch-accessories/license-plate-light-mounts?ka=winch%20license%20plate%20%26%20light%20mounts
Timothy J.
How much does this bumper weigh?
This bumper weighs about 92 lbs.
Michael S.
Is the bumper winch ready or do I have to purchase a plate?
This bumper package does include a winch plate with fairlead mount.
Jeff W.
Does the vacuum pump need to be relocated as with other bumpers .
No, This bumper was designed after that became an issue so it was engineered around.
Marty L.
Is there any drilling involved?
Yes. See details in step 3 of the Instructions.
Jessica R.
What size light bar fits accross the mounts on this bumper?
Hello, per the manufacturer there are 3 sets of light mount holes on this bumper. It depends on which holes you are talking about. There are holes that are 8.75" apart where you could fit a 7.5" or 8" bar. There are holes that are 12" apart where you can fit a 10" bar. Also, there are light tabs that are 14.875 inches apart where you can mount a 12" light bar.