Crown Automotive RT23002 Manual Axle Disconnect Kit for 87-95 Jeep Wrangler YJ and 84-93 Cherokee XJ and Comanche MJ with 0-3" of Lift
Description
The Crown Automotive Manual Axle Disconnect Kit is a direct replacement for the factory vacuum system that was supplied on stock axles. This kit eliminates the vacuum diaphragm and puts all of the control in the hands of the driver. No more partial engaging or disengaging, and no more changing vacuum pumps every couple years. Simply push the button and pull the cable to activate. For Everyday street driving press push the cable in to deactivate the shift fork in the axle. This kit can work with the factory shift fork already in the axle, but for the ultimate in performance, upgrade to the Heavy Duty Shift Fork.
Details
- RT23002 Cable Length : 86"
- RT23003 Cable Length : 104"
- Axle Model: Dana 30
- Axle Position: Front
- Features: Posi-Traction
*Please make a selection above to view weight, dimensions, specs of a specific product
Jeep Cherokee (XJ)
- 1993 Jeep Cherokee (XJ)
- 1992 Jeep Cherokee (XJ)
- 1991 Jeep Cherokee (XJ)
- 1990 Jeep Cherokee (XJ)
- 1989 Jeep Cherokee (XJ)
- 1988 Jeep Cherokee (XJ)
- 1987 Jeep Cherokee (XJ)
- 1986 Jeep Cherokee (XJ)
- 1985 Jeep Cherokee (XJ)
- 1984 Jeep Cherokee (XJ)
Jeep Comanche (MJ)
- 1992 Jeep Comanche (MJ)
- 1991 Jeep Comanche (MJ)
- 1990 Jeep Comanche (MJ)
- 1989 Jeep Comanche (MJ)
- 1988 Jeep Comanche (MJ)
- 1987 Jeep Comanche (MJ)
- 1986 Jeep Comanche (MJ)
Jeep Wrangler (YJ)
- 1995 Jeep Wrangler (YJ)
- 1994 Jeep Wrangler (YJ)
- 1993 Jeep Wrangler (YJ)
- 1992 Jeep Wrangler (YJ)
- 1991 Jeep Wrangler (YJ)
- 1990 Jeep Wrangler (YJ)
- 1989 Jeep Wrangler (YJ)
- 1988 Jeep Wrangler (YJ)
- 1987 Jeep Wrangler (YJ)
Crown Automotive Manual Axle Disconnect Kit Options
| Part Number | Catalog # | Height | Price | ||||||
|---|---|---|---|---|---|---|---|---|---|
| RT23002 | 52432-0005 | 3" or Less | $152.99 | ||||||
| RT23003 | 52432-0006 | 3" or Greater | $152.99 |
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Crown Automotive Manual Axle Disconnect Kit Reviews
Guest
5/29/2022
Ain't got it yet, but it was cheap enough
Brent S.
3/2/2022
This worked on my 1987 Jeep Wrangler. I didn’t know if I needed the longer cable length so I went ahead and got the longer one and it worked just fine I routed it over the left front fender down behind the headlight back behind the engine mount and then over to the differential.
Brian M.
9/12/2019
I ordered this part, and when I went to assemble it, the housing had not been machined correctly, and the part would not work. I called customer service to let them know, and within minutes they emailed me a free return UPS address label to return the defective part, then the next day I received the replacement part. It was milled correctly, and installed without issue. Very good customer service.
Questions
Ray H.
Can you spin the nob to engage it and take it out or do you have to push the button. Because mine I can spin it left and its comes to me and if I spin right it goes back in
The button is pressed to engage the disconnect. Thanks for your inquiry.
Rick A.
Is there replacement parts for the in cab end push button mine sun cracked and broke
Unfortunately we are not able to get replacement components for this kit.
Brent W.
Do they make this cable for a 2001 TJ?
No, a TJ should not have an axle with a vacuum disconnect.