DV8 Offroad TTJK-01 Folding Trail Table for 07-18 Jeep Wrangler JK

Installed this on a 2013 JKU. The fit and finish is good, the powder coating is nice, all the holes line up and the hardware is stainless. The bad: The nutserts were SAE 1/4-20, the supplied bolts were 6mm, I used 6mm nutserts from the nutsert kit I had. Additionally 2 of the 5mm screws that hold the cable to the bracket were too short to engage the lock nut, I used some other screws to finish the install. The directions are not real clear on where to position the brackets on the tailgate. If you have the factory sub make sure you place the table as far to the drivers side as possible, I got lucky and mine just barely touches the sub when the tailgate is closed. Overall the table is solid and seems like it will hold up, but the hardware and directions could be a lot better.

I would not buy it again . I think a design with the top connected would make it easier to line everything up. also Lots of little parts to assemble first- take your time and double check your work. Mistake on my part I got the spacer wrong on one side. Almost ready to drill triple checking and fortunately spotted it. Get a nut sert tool but then I think you need it regardless of the brand of table.