Fox® Racing Shox 983-02-148 Factory Race Series 2.0 ATS Steering Stabilizer for 18-24 Jeep Wrangler JL & Gladiator JT
Factory Race Series 2.0 ATS Steering Stabilizer Specs:
Shock Body Diameter: 2”
Shock Body Material: 6061-T6 Aluminum
Shock Body Finish: Clear Hard Anodized
Shock Component Material: 6061-T6 Aluminum
Shock Component Finish: Black Hard Anodized
Shaft Diameter: 5/8”
Shaft Material: Heat-Treated Steel Alloy
Shaft Finish: Hard Chrome Plating
Piston: Race-Developed High-Flow Design
Redundant Valve Seals: Main Seal, Wiper Seal, and Scraper Seal
Shock Oil: JM92 Advanced Suspension Fluid
Shock Gas: High Pressure Nitrogen
Bushing Material: Black Nitrile Rubber
Adjustable: 24 Clicks of Adjustability
Charge: Neutrally Charged
Extended Length: 23.20” (589.28mm)
Collapsed Length: 15.10” (383.54mm)
Travel: 8.10” (205.74mm)
- Features: Piggyback Reservoir
- Location: Steering Stabilizer
- Front Collapsed Length: 15.100"
- Front Extended Length: 23.200"
- Front Travel: 8.10"
- Shipping Weight: 7lb
- Shipping Dimensions: 28in x 5in x 3in (L x W x H)
Jeep Gladiator (JT)
- 2024 Jeep Gladiator (JT)
- 2023 Jeep Gladiator (JT)
- 2022 Jeep Gladiator (JT)
- 2021 Jeep Gladiator (JT)
- 2020 Jeep Gladiator (JT)
Jeep Wrangler 2-Door (JL)
- 2024 Jeep Wrangler 2-Door (JL)
- 2023 Jeep Wrangler 2-Door (JL)
- 2022 Jeep Wrangler 2-Door (JL)
- 2021 Jeep Wrangler 2-Door (JL)
- 2020 Jeep Wrangler 2-Door (JL)
- 2019 Jeep Wrangler 2-Door (JL)
- 2018 Jeep Wrangler 2-Door (JL)
Jeep Wrangler Unlimited 4-Door (JL)
- 2024 Jeep Wrangler Unlimited 4-Door (JL)
- 2023 Jeep Wrangler Unlimited 4-Door (JL)
- 2022 Jeep Wrangler Unlimited 4-Door (JL)
- 2021 Jeep Wrangler Unlimited 4-Door (JL)
- 2020 Jeep Wrangler Unlimited 4-Door (JL)
- 2019 Jeep Wrangler Unlimited 4-Door (JL)
- 2018 Jeep Wrangler Unlimited 4-Door (JL)
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Fox® Racing Shox Factory Race Series 2.0 ATS Steering Stabilizer Reviews
I installed this on a stock 392 and love it. 25 levels of adjustability enable you to dial your steering in to the precise feel you want and it’s easy to change. This eliminated the “slop” that I felt in my steering for day-to/day drives. 100% recommended if you want to get more control over the feel of your steering, even for stock Jeeps. Just make sure you have the right bolt on hand if you have a 2021 or newer model - you won’t be able to reuse one of the factory bolts though Fox suggests that you can in the instructions. You’ll need MOPAR part 6510774AA which is like $3.
Preferred band
I received it yesterday and installed it today. It went on easily and everything fit perfectly, with only the need to rotate the reservior so it was just right and clear of everything. Wow, what a difference on the road! I have it adjusted about half way between the extremes on the settings, so maybe 12 clicks. It is perfect. I hit some bumps at 55mph and it was solid. It tracks perfectly and there is no slight pull to the right as with the Fox 2.0 stabilizer. I'll probably further fine tune it to my liking, but the first impression is that this is an outstanding stabilizer and that I should have bought it sooner. Fox is a great company. Finally the steering dampener lives up to the Fox shocks on my JL! Btw, the instructions were pretty good, too, although the print is pretty small. I'd love to see color photos, too, but they did the job. I did refer to Quadratec's video where Rob showed some good close-up shots of both ends, which were helpful.