Home » Jeep Steering & Brakes » Steering Linkage » Drag Links » GenRight Off Road STK-2503 Off Road Drag Link Correction Link for 87-06 Jeep Wrangler YJ & TJ
GenRight Off Road Off Road Drag Link Correction Link is no longer available
Here are some similar items you might be interested in

GenRight Off Road Off Road Drag Link Correction Link for 87-06 Jeep Wrangler YJ & TJ


This is the GenRight Drag Link Correction Kit with heim joints. It includes GenRights Twisted Pitman Arm, heim joints, bungs, jam nuts, bolts and our Hi-Steer Arm Mount to correct the angle issues inherent in long travel front suspensions. The main issue is not enough down travel on the drag link heim joint when both the pitman arm and hi-steer arm are flat. GenRight has created a double shear mount at both ends using a 5/8" Grade 8 bolt. This Heavy Duty kit will hold up to big tires and off-road abuse. Got a hydraulic assist steering ram? It will work with that too. Why heim rod ends? GenRight prefers the heims over the standard or heavy duty "tapered style" tie rod ends because, over the years they have seen the taper on the tie rod end split too many steel knuckles! This is the exact same steering set up GenRight has used on their GenRight rigs for years, and it works great!
Made in the USA!

  • "Twisted" pitman arm to utilize the full range of motion in a heim rod end.
  • Hi-Steer arm mount that is angled to match pitman arm.
  • Both products are laser cut & CNC bent from 1/4" thick steel plate.
  • Design is puzzled together for maximum interlocked strength.
  • Double shear design.
  • Includes 5/8" size Grade 8 hardware.
  • Tapered spline is TIG welded into the GenRight Twisted arm.
  • 5-1/2" center to center (same as stock TJ or YJ).
  • Unique internal thread for easy removal from sector shaft.
Installation Notes
Installation Difficulty:
Level 4Experts Only
  • This kit requires cutting and welding to properly install it on a off road vehicle.
  • This kit requires moving the axle side trac bar mounting location to match the new higher drag link position!
  • Once installed, you must cycle the front suspension and steering to make sure the hi-misalignment heims do not exceed their range of motion which would damage the steering components!
Installation Time: 8-10 hours
Parts Included

1 Twisted Pitman Arm
1 Cap for pitman arm threads.
1 36" long x 1-3/8" thick wall DOM tubing.
1 7/8 threaded bung, LH.
1 7/8 threaded bung, RH.
1 7/8 Jam nut, LH.
1 7/8 Jam nut, RH.
1 FK brand 7/8" shank CrMo Heim, LH.
1 FK brand 7/8" shank CrMo Heim, RH.
4 Hi-Misalignment spacers.

Limited 1 Year Structural Warranty. 90 Day Finish Warranty.
  • Features: Chromoly
  • Jeep Wrangler (TJ)

  • 2006 Jeep Wrangler (TJ)
  • 2005 Jeep Wrangler (TJ)
  • 2004 Jeep Wrangler (TJ)
  • 2003 Jeep Wrangler (TJ)
  • 2002 Jeep Wrangler (TJ)
  • 2001 Jeep Wrangler (TJ)
  • 2000 Jeep Wrangler (TJ)
  • 1999 Jeep Wrangler (TJ)
  • 1998 Jeep Wrangler (TJ)
  • 1997 Jeep Wrangler (TJ)
  • Jeep Wrangler Unlimited (TJ)

  • 2006 Jeep Wrangler Unlimited (TJ)
  • 2005 Jeep Wrangler Unlimited (TJ)
  • 2004 Jeep Wrangler Unlimited (TJ)
  • Jeep Wrangler (YJ)

  • 1995 Jeep Wrangler (YJ)
  • 1994 Jeep Wrangler (YJ)
  • 1993 Jeep Wrangler (YJ)
  • 1992 Jeep Wrangler (YJ)
  • 1991 Jeep Wrangler (YJ)
  • 1990 Jeep Wrangler (YJ)
  • 1989 Jeep Wrangler (YJ)
  • 1988 Jeep Wrangler (YJ)
  • 1987 Jeep Wrangler (YJ)