Poison Spyder Rocker Knockers in Bare Steel for76-86 Jeep CJ-7

Poison Spyder Rocker Knockers are the ultimate protection for your Jeep's vulnerable rocker panel area. As the trails get tougher and recreational off-roading gets more and more hardcore, vehicle body damage becomes more prevalent. And rocker panels are most vulnerable, taking hits from both underneath and the sides as you work your way through tight obstacles. Poison Spyder Rocker Knockers protect your rocker panels by cladding them in rugged, high strength 3/16" plate steel armor. Rocker Knockers are manufactured to hug the lines of your Jeep's rocker panels perfectly, forming a glove-fit with virtually no loss of valuable ground clearance. Rocker Knockers are CNC laser cut from high strength 3/16" plate steel, and precision brake-formed for a perfect fit. Bolt holes are countersunk for the included stainless steel flat head hardware, which yields a flat, unobstructed surface to slide over obstacles. All mounting hardware is included as well as detailed installation instructions. Poison Spyder Rocker Knockers bolt to your Jeep's body in key areas, and interface with strengthened areas of the underside of the tub such as body mounts, strengthening ribs, etc. Because they mount to the body itself, there is no resulting gap or misalignment when a body lift is installed. This specific part number is for use on CJ-7's where the stock front and rear fender flares are being retained, as they are cut to fit around the flares at either end. This specific part number is also compatible with Poison Spyder's "CJ-7 Crusher Corners - Stock". These are NOT compatible with "CJ-7 Crusher Corner - Standard" or "CJ-7 Crusher Corners - Comp-Cut"; in those cases choose the "YJ/CJ-7 Rocker Knockers - Standard". For installations in which you would like to protect the paint underneath the Rocker Knocker, as well as provide a measure of vibration absorption, Poison Spyder offers Rubber Rocker Liners, precisely cut to fit between the Rocker Knocker and the Jeep's body (sold separately). This product ships as bare steel; it will need to be painted or powder coated prior to final installation.