Skip to main content
Home » Jeep Engine & Fuel System » Engine Tuning » Performance Chips » Superlift Electronic Geometry Recalibration (EGR) Module
Superlift Electronic Geometry Recalibration (EGR) Module is no longer available
Here are some similar items you might be interested in

Superlift Electronic Geometry Recalibration (EGR) Module for 05-07 Jeep Grand Cherokee WK & Commander XK with Superlift 4" Suspension System

Description
The Grand Cherokee and Commander were some of the first vehicles to include Jeep's Electronic Stability Program (ESP). Creating a true performance lift system with ESP compatibility has been a stumbling block for most suspension manufacturers. Superlift relies on our exclusive Electronic Geometry Recalibration (EGR) module, produced by AEV, to provide the properly calibrated steering input signal to the factory ESP unit. The EGR module also allows for speedometer recalibration, desired when taller height tires and / or different axle gear ratios are installed. The module simply plugs into an existing wiring harness located beneath the dash. Use only with the Superlift Grand Cherokee and Commander 4” lift systems.
Details

Fits 2005-2007 Jeep Grand Cherokee and Commander (both 2WD and 4WD). Vehicle must be equipped with Superlift 4” lift system.

Installation Notes
Installation Difficulty:
Skill Level 2 IconLevel 2Intermediate

Required Tools
T20 Torx driver
#1 Screw Driver
Razor
Wrench/Socket
(to remove negative battery terminal)
Tape Measure
Straight Edge

Installation Time: 1-2 hours
Parts Included

EGR Module
EGR Module Wiring Harness
2 Zip Ties

Warranty
Limited Lifetime Warranty.
  • Jeep Grand Cherokee (WK)

  • 2007 Jeep Grand Cherokee (WK)
  • 2006 Jeep Grand Cherokee (WK)
  • 2005 Jeep Grand Cherokee (WK)
  • Jeep Commander (XK)

  • 2007 Jeep Commander (XK)
  • 2006 Jeep Commander (XK)