Save $19.99 when you buy a Quadratec 2 Bike Folding Rack & Quadratec Premium 2" Receiver Hitch!
The Quadratec Folding Receiver Hitch 2 Bike Rack is designed to clear the rear spare tire without the need of a hitch extension and work with any 2” receiver... more
JCR Offroad manufactures bumpers, sliders, and armor for 07-16 Wranglers. Available in Stubby, Mid and Full Width versions, JCR Offroad has a bumper that will suit your needs. They have a dedication to quality fabrication and are proud to build their products in Portage, Michigan on American made manufacturing equipment. They stand behind their products with a lifetime warranty.
The TeraFlex JK Explorer front bumper is designed as an ultra-minimal but functional accessory. This bumper will fit all major winch models with standard bolt pattern - including the larger Warn Powerplant. Integrated D-Ring mounts aid with recovery
equipment. The Explorer bumper also allows the use of the factory fog lights to retain factory styling and technology... more
The TeraFlex RockGuard Outback rear bumper for the JK Wrangler is designed to offer ultimate rock protection, and continue to match the design styling of the vehicle’s body. With state-of-the-art CAD software, extensive engineering has been utilized to provide a look that flows with the JK and still offers the protection needed to allow the 4500+ lb... more
Save $20 on VersaHitch Kit
This patented hitch design features a 2” Class II receiver at the center with two additional 1.5” accessory receiver tubes for superior stability over a single receiver design... more
48”x19.5” floor with 5” tall sides. Holds up to 300lbs.
These are a great value for those needing a basic cargo rack that is optimized for Jeep applications.
Our cargo racks are designed for a Class II receiver hitch and are rated to hold up to 300lbs cargo capacity but may be limited by a lesser vehicle or hitch capacity rating.
60”x24” floor with 6” tall sides. Holds up to 300lbs.
As much as we love our Jeeps, the limited rear cargo space is sometimes inadequate. A Quadratec receiver hitch cargo rack is an excellent solution. The simple convenience of adding additional payload when you need it makes these handy units indespensible. Fits into any 2” receiver hitch tube to provide instant storage for camping gear, luggage, hunting trophies, gardening materials, coolers and perhaps this years Christmas tree.
49.5”x22.5” floor w/ 8” sides. Holds up to 300lbs.
Fits into any 2” receiver hitch tube to provide instant storage for camping gear, luggage, hunting trophies, gardening materials, coolers and perhaps this years Christmas tree. Quadratec’s receiver hitch cargo racks make easy hauling for nasty, dirty stuff like this week’s trash, greasy car parts, sacks of concrete and bags of mulch.
All without making a mess of the inside of your vehicle.
Get a Free $100 Tread Lightly Membership when you purchase qualifying Smittybilt products Now through December 31st, 2016. Smittybilt offers the perfect camping solution for JK Wrangler owners! This complete tent set up features heavy-duty rip stop polyster, waterproof and polyurethane-impregnated top for the ultimate in durability... more
The RSE - Rock Slide Engineering Front bumper is built with 3/16" aluminum and 1/4" mounting
plates. Features include 2 recovery shackle points and a lowered winch mount plate to maximize airflow through the radiator. This innovative design provides a unique and distinctive look that compliments the style lines of your Wrangler with serious off road durability... more
The RSE - Rock Slide Engineering Front bumper is built with 3/16" aluminum and 1/4" mounting
plates. Features include 2 recovery shackle points, integrated light pockets, which fit PIAA 520 Series Lights perfectly, and a lowered winch mount plate to maximize airflow through the radiator. This innovative design provides a unique and distinctive look that compliments the style lines of your Wrangler with serious off road durability... more
This bumper is made from ¼" CNC Laser cut and bent steel or aluminum for consistent quality. Tapers down and back to protect the factory lower front cross frame and Sway-bar disconnect unit(if equipped). Provides the best possible approach angle without cutting of the factory frame. Winch is mounted low in bumper for those concerned about air flow... more
Okay, so you want to travel where few have dared to go! The Kargo Master Bushman rack gives you the rugged strength of all-steel construction. It features one inch diameter round tube side rails, formed ‘air foil’ cross beams and stainless fasteners. Flooring is one inch square tubing, and mounting hardware bolts directly to the factory rack rails or rain gutters... more
SAVE BIG with our popular Q-Series Winches combined with the Smittybilt M.O.D. Modular Bumper for '07-'15 Wranglers!
Build it the way you want it! This JK XRC M.O.D. (Multi Optional Design) Bumper System allows you to design your bumper for any terrain.
The new Hyline Offroad mid width bumper is about 6” shorter on it’s overall width than a full size bumper. It is designed for the everyday Jeep enthusiast that enjoys the mid width style, but also stands up to anything the toughest trail can throw at it. The bumper incorporates factory fog light cutouts and mounts, fully welded shackle mounts, winch fairlead plate, threaded holes for license plate mounting and the option to install our Air Dam Skid Plate and/or Tube Winch Guard... more
Built to withstand heavy offroad use, but also designed for great looks on the street. All front bumpers incorporate tapered ends for increased approach angles and fully welded 5/8" thick steel D-Ring Mounts. HyLine OffRoad's unique original design allows you to install your winch after mounting the bumper to the vehicle and also provides pre-threaded holes to mount your license plate... more
Save BIG when you combine our popular Q Series Winch with the Rugged Ridge XHD Modular Bumper. Choose from four incredible options starting with our introductory combo of a Center Base Section Bumper with Q Series Winch. The New revolutionary bumper system that literally allows you to design & build your own custom bumper... more
Save up to $200 with the purchase of Smittybilt XRC Front & Rear Atlas Bumpers! Now through June 30th, 2016. The Smittybilt XRC Atlas Front Bumper for Wrangler JK Vehicles features
an innovative 4 piece design with recessed winch mount allowing greater
air flow through the grille... more
The Mopar Steel high clearance bumper was found on the 10th Anniversary Wrangler Rubicons. It is wide enough to provide fender protection but is narrower than the stock bumper. Uses the production tow hooks. Designed for use with or without winch mount. The Winch is mounted low for protection, and does not restrict engine cooling... more
Transform your original factory front bumper into an aggressive stubby off road version with improved tire clearance. This is a simple do-it yourself kit that reduces your bumper width by 17.5" for custom looks and better approach angles. Kit includes easy-to-follow instructions on cutting along with all the necessary fasteners. Made from 3/16" thick roto molded plastic with matching textured finish. Made in USA. MOPAR® Bumper Appliques Sold Separately.
Transform your original factory front bumper into an aggressive high clearance off road version with improved tire clearance. This is a simple do-it your-self kit that creates a custom look with better approach angles. Kit includes easy-to-follow instructions on cutting along with all the necessary fasteners. Made from 3/16" thick roto molded plastic that closely matching the factory textured finish. Made in USA. Cutting and drilling of the factory bumper required. Mopar Bumper Appliques Sold Separately.
If you are looking to mount a winch without changing your front bumper, Rock Hard 4x4 has you covered. This Winch Mount fits most brand winches with a standard bolt pattern to the factory front bumper or optional factory tubular bumpers. Simple installation with no drilling required will have you ready for the trails in no time... more
The new over rider hoops to protect your grille and winch for the ultimate look. Hoops are available with and without light tabs. Simple installation with no drilling required will have you ready for the trails in no time.
The new standard in JK front winch bumpers has arrived! The new Hyline Offroad mid width bumper is designed with a fully recessed, fully integrated winch plate and is about 6" shorter on it's overall width than a full size bumper. The recessed winch plate keeps your radiator free and clear to allow adequate airflow... more
Hyline's JK Rear Bumper Swingout Tire Carrier is a must have if you're running oversize tires. The JK's tailgate might hold the weight of an oversize tire for a while, but it will begin to sag over time. This Swingout Tire Carrier is heavy duty and opens and closes with the stock tailgate. Finally, there is no cumbersome latch or secondary operation to open your swingout tire carrier... more
Custom made for Wrangler Hardtop, the Surco Safari Rack system is nothing short of revolutionary. The cleverly designed and patent pending steel bracketry requires no-drilling and the easy on/off adapters make installation and removal a breeze. The lightweight aluminum tube construction is both strong and durable to hold up to 150 lbs. of cargo. Rack measures 50" wide x 60" long and 5" deep and fits '87-'12 Wrangler and both 2 & 4 door JK with factory hardtop models. Spare tire, Hi-Lift Jack, Axe & Shovel Brackets and Light mounts are sold separately.
Heavy Duty Front lighted bumper for vehicle Protection and recovery assistance - Day or Night!! Engineered for off road use and rock crawling abuse. Ground level dual light receptacles maximize light distribution, save space and are recessed for light protection. Recovery bumpers feature protective dual stage, durable, powder coat finish - 3/16" Steel plate design with 4 inch light openings for a custom look. Custom welded shackle mounts with clevis 1" D-rings included. Front JK Recovery bumper includes Winch Mounting plate.
Heavy Duty Rear lighted bumper for vehicle Protection and recovery assistance - Day or Night!! Engineered for off road use and rock crawling abuse. Ground level dual light receptacles maximize light distribution, save space and are recessed for light protection. Recovery bumpers feature protective dual stage, durable, powder coat finish - 3/16" Steel plate design with 4 inch light openings for a custom look. Custom welded shackle mounts with clevis 1" D-rings included.
The new Garvin Industries Adventure rack for the JK is the most versatile rack we have ever offered. The rack is perfect for someone looking to mount a canoe or kayak, or even a piece of plywood from your local hardware store. With the optional accessories, you can turn it into a full-on off-road rig. The Adventure rack mounts to the front windshield and frame holes in the rear of the Jeep, with no drilling required. The rack can be tilted back to lower or raise the soft-top. The weight capacity for the Adventure Rack is 300 lbs.
With superior craftsmanship, the AEV Front Bumper incorporates stamped and welded steel construction that's the new benchmark in quality and design. All AEV bumpers receive an OE-level coating process that includes E-Coat dipping, zinc-rich powder primer and a top coat of durable textured black powder coating. Overall the AEV JK bumpers are a milestone in aftermarket bumper manufacturing and as a result they deliver exceptional performance, style and value.
AEV's Rear Bumper and Tire Carrier system provides robust protection against highway and trail impacts, and includes a strong, vibration-free and effortless means for carrying tires of up to 40" in diameter.
Both the Rear Bumper and Tire Carrier are designed so that either component can be installed and used individually, or they can be used together as a complete system.
Do you find it difficult to see behind your JK Wrangler when backing up? With all of the blind spots created by the Wrangler's top, spare tire, head rests and rear wiper motor (if equipped), even the best drivers find backing out of parking spaces very intimidating. The EchoMaster system processes ultrasonic signals that are projected from sensors that are mounted in the rear bumper and are activated while the vehicle is in reverse. These signals "Echo" off objects in the detection field while the control unit's microprocessor translates them to audible warning sounds inside the vehicle alerting the driver.
The RSE - Rock Slide Engineering Front and rear bumpers are built with 3/16" alloy steel and 1/4" mounting plates. Front Bumper features
include 2 recovery shackle points, integrated light pockets, and lowered winch mount plate to maximize airflow through the radiator. Other great features include a unique fabricated bull bar with optional winch work light kit... more
The TeraFlex Heavy Duty Hinged Carrier is designed to carry up to a 37" tire when used in conjunction with the HD Adjustable Spare Tire Mount Kit (see recommended below) and a 35" tire when used with the stock tire mount. The reinforcement Kit spreads the load and weight of the tire to more than just one hinge point... more
Design is focused on it's strength and rock-clearing abilities. Designed to be the ultimate in functionally-stylish front end protection, the Fab Fours front winch bumper will set the new standard in truck customization.
Except no less then the best. Rock Hard 4x4 Parts makes the toughest heavy duty off-road rock bumpers and tire-carriers in the industry. Protect the front and rear of your Jeep while adding function and good looks all at the same time.
Bolt on design that installs with simple hand tools. Accepts winches from all major manufacturers such as Warn, Ramsey, Superwinch, Mile Marker and T-Max. Accommodates 9.5 winches and select 12K winches within the bumper body and accepts roller fairleads. Integrated Hi-lift jacking points. Matches front width of factory fender flares for an aggressive and stylish look. Heavy duty powder coat finish to provide maximum protection for years to come.
The following parts require additional handling charges due to their large size or
weight: wheels, tires, full suspension lift kits, oversized bumpers, tire carriers, body tubs, hard tops
and cargo racks. The following parts do not qualify for free shipping: Oversized items and items
delivered by truck freight, as well as prior purchases and returns.
Jeep Parts & Jeep Accessories Take your Jeep to the next level with the parts found on our site. We are a leading Jeep accessories retailer, providing performance products for our customers. We work hard to give you the best information to turn your vehicle into a top-notch ride. Whether you are looking for a Jeep lift kit or want improved Jeep engine performance, we have the parts & Jeep accessories you need.
The terms Quadratec, Essentials, QuadraPac, QuadraTop and TACTIK are Registered Trademarks of Quadratec Incorporated, Registered in U.S. Patent and Trademark Office. All manufacturers names, numbers, symbols and descriptions are used for reference purposes only, and it is not implied that any part listed is the product of these manufacturers or approved by any of these manufacturers.
* Jeep, Wrangler, Rubicon, Renegade, CJ, Quadra-Trac and the Jeep Grille Design are registered trademarks of FCA (Fiat Chrysler Automobiles). Quadratec, Inc, has no affiliation with FCA. Throughout this website and catalog the terms Jeep, Wrangler, MOPAR®, & Rubicon are used for identification purposes only. It is not implied that any part listed is a product of, or approved by Fiat Chrysler Automobiles.
** To qualify for FREE shipping the parts on an individual order must meet a combined total value of $49 or more. Customer must select Standard Shipping in the checkout and ship to an address in the contiguous 48 United States. Some parts require additional handling charges due to their large size or weight: including wheels, tires, full suspension lift kits, oversized bumpers, tire carriers, body tubs, hard tops, cargo racks, winches and hitches. Oversized items, items that are delivered by truck freight, prior purchases and returns do not qualify for free shipping.
* Free Shipping Special Offer Details
To qualify for FREE shipping the parts on an individual order must meet a combined total value of $49 or more. Customer must select Standard Shipping in the checkout and ship to an address in the contiguous 48 United States. Some parts require additional handling charges due to their large size or weight: including wheels, tires, full suspension lift kits, oversized bumpers, tire carriers, body tubs, hard tops, cargo racks, winches and hitches. Oversized items, items that are delivered by truck freight, prior purchases and returns do not qualify for free shipping.