Reviews for Rugged Ridge 17275.04 Hitch Wiring Harness for 18-20 Jeep Wrangler JL

Works perfect. Quick and easy install.

The only negative I have is the power wire was about a foot short, but that may have been the way I routed my wires.
I took about 2 hours to route the wires from the battery, through the firewall behind the brake booster and then under the carpet trim to the back. Routed all the wiring from the drivers side light to the passenger side and secured everything. Stopped for the evening. Next morning I started the final hook up and splices for the power to both sides. Final step was to insert the fuse. Hooked up the utility trailer and boat wires and everything worked great. So 3 hours total. Recommend this for the DIY crowd.

I am about to install this "Plug and play unit" first time "plug and play" came with a roll of wire needed to run from the battery to the tail lights, tis is certainly not, "plug and play" Details to follow...

The connector for running lights is pinned wrong, brown wire is going to pin next to driver brake light, comparing it to the other makes available they are 4th pin over. No running lights, only brake and turn signals, checked power from the running light pin and nothing. Verified that trailer running lights work with other vehicle. I have the LED and safety pack, but this part does not specify anything about which lights you have. Waste of 3 hours to install then have to remove right after.