Fab Fours JK1001-1 Rear Fenders for 07-18 Jeep Wrangler Unlimited JK
- Made in the USA
- Modular Design
- Aggressive Styling
- Provides Greater Tire Clearance
- Allows for Larger Tire
- Base Fender is Constructed from 11 Gauge Steel
- Removable Fender Skin is 16 Gauge Steel
- Finished in 2 Stage Matte Black Powder Coat with Epoxy Primer
- Color: Bare Steel
- Size: Wide
- Style: High Top
- Material: Steel
- Shipping Weight: 50lb
- Shipping Dimensions: 60in x 27in x 16in (L x W x H)
Jeep Wrangler Unlimited 4-Door (JK)
- 2018 Jeep Wrangler Unlimited 4-Door (JK)
- 2017 Jeep Wrangler Unlimited 4-Door (JK)
- 2016 Jeep Wrangler Unlimited 4-Door (JK)
- 2015 Jeep Wrangler Unlimited 4-Door (JK)
- 2014 Jeep Wrangler Unlimited 4-Door (JK)
- 2013 Jeep Wrangler Unlimited 4-Door (JK)
- 2012 Jeep Wrangler Unlimited 4-Door (JK)
- 2011 Jeep Wrangler Unlimited 4-Door (JK)
- 2010 Jeep Wrangler Unlimited 4-Door (JK)
- 2009 Jeep Wrangler Unlimited 4-Door (JK)
- 2008 Jeep Wrangler Unlimited 4-Door (JK)
- 2007 Jeep Wrangler Unlimited 4-Door (JK)
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Fab Fours Rear Fenders Reviews
Ok first thing first...the product is solid. The companies response time was acceptable. That's where the good ends and the bad begins. Instructions are terrible....doesn't even list the size fasteners. Multiple screw ports were messed up, when I called the company they said well get a tap and die set...the gas hole will need to be modified if you have a after market gas cover most likely... very hard since this product is solid steel. Installation is not easy if your punch is slightly off center the rivet nut holes do not line up. I suggest drilling the holes with the product held in place by bottom screws and a helper.... terrible company There is a good installation video on you tube that is so much better than there directions. The guy is from texas...
