Mopar 77072413 Rubicon Locker Switch Harness for 18-24 Jeep Wrangler JL & Gladiator JT
Quadratec Part #:
52446-1009
Mopar Part #:
77072413
Description
This original equipment Locker Wiring Harness from Mopar is required to operate the factory electronic locking differential on the Jeep Rubicon. If you are upgrading to a new locker, axle assembly or simply replacing original wiring, this kit is the perfect fit. Original connections for plug and play operation at the axle end and the switch end, Rubicon can maintain use with locker/sway bar switch, upgrading models need to operate with auxiliary switch option.
Popular Similar Items
Details
Repair or Upgrade: For Factory Electronic Locking Differentials, Used For Repairing Jeep Wrangler JL Rubicon and Gladiator JT Rubicon Locker System or Used When Adding a Rubicon Axle to a Sport or Sahara Model.
- Shipping Weight: 0.4lb
- Shipping Dimensions: 9in x 8in x 2in (L x W x H)
Jeep Gladiator (JT)
- 2024 Jeep Gladiator (JT)
- 2023 Jeep Gladiator (JT)
- 2022 Jeep Gladiator (JT)
- 2021 Jeep Gladiator (JT)
- 2020 Jeep Gladiator (JT)
Jeep Wrangler 2-Door (JL)
- 2024 Jeep Wrangler 2-Door (JL)
- 2023 Jeep Wrangler 2-Door (JL)
- 2022 Jeep Wrangler 2-Door (JL)
- 2021 Jeep Wrangler 2-Door (JL)
- 2020 Jeep Wrangler 2-Door (JL)
- 2019 Jeep Wrangler 2-Door (JL)
- 2018 Jeep Wrangler 2-Door (JL)
Jeep Wrangler Unlimited 4-Door (JL)
- 2024 Jeep Wrangler Unlimited 4-Door (JL)
- 2023 Jeep Wrangler Unlimited 4-Door (JL)
- 2022 Jeep Wrangler Unlimited 4-Door (JL)
- 2021 Jeep Wrangler Unlimited 4-Door (JL)
- 2020 Jeep Wrangler Unlimited 4-Door (JL)
- 2019 Jeep Wrangler Unlimited 4-Door (JL)
- 2018 Jeep Wrangler Unlimited 4-Door (JL)
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Questions
Jacky M.
My rubicon Alex locker have four wires, why this one only have two? will this work for my rubicon?
Yes, this is the correct wiring.
Robert B.
I have Rubicon axles on my sport... Do I need a separate wiring harness to activate the rear Locker too ?
Yes each locker will need a harness.
Jason M.
So does this make engaging and disengaging stock JL Rubicon axles a simple "two wire" setup? In other words, if I put Rubi 44's in my Sport do I just use this harness and run it to a powered switch to activate/deactivate?
This wiring assembly is meant to be run from the factory switch #56046716AC. Once the switch is installed and wired you must have a dealer flash the computer to initiate the functions of the switch. It can also be used as a replacement wiring for vehicles already outfitted with the Rubicon locker system.
