Oracle Lighting 5891-504 Flush Mount Tail Lights for 07-18 Jeep Wrangler JK
Easy Install: Simple plug-and-play installation. The plug-and-play design features an enhanced reverse function and caters to the Jeep’s optional cross-traffic sensor.
Waterproof: IP67 waterproof rated.
Unique Styling: These wrap-around lights provide improved LED lighting features including high-powered reverse lights and signature perimeter lighting. The low-profile, wrap-around design can be visible from any rear angle. Comes in your choice of Standard Red or a sleek Black Out Tinted Version.
The ORACLE Lighting Flush Tail Lights for Jeep Wrangler JK are designed to fit flush with the rear end of the Jeep Wrangler. These flush tail lights offer improved features and OEM factory styling. This innovative design has a sleek tail light for Jeep Wrangler JL that wraps tightly around the Jeep. Protruding out significantly less than the factory tail lights, this low-profile design avoids damage while trail riding. Because of the nearly flush wrap-around design, the lighting can be visible from any rear angle. These lights provide improved LED lighting features including high-powered reverse lights and signature perimeter lighting. In addition to standard features, the plug-and-play design features an enhanced reverse function and caters to the Jeep’s optional cross-traffic sensor. The reverse light features 12 high-powered LEDs for optimal rear illumination. The cross-traffic sensor can be swapped directly over from the factory assembly and easily installs into the Oracle Lighting tail lights for Jeep Wrangler. Oracle tail lights are the perfect upgrade for your Jeep Wrangler JK
- Features: LED
Jeep Wrangler 2-Door (JK)
- 2018 Jeep Wrangler 2-Door (JK)
- 2017 Jeep Wrangler 2-Door (JK)
- 2016 Jeep Wrangler 2-Door (JK)
- 2015 Jeep Wrangler 2-Door (JK)
- 2014 Jeep Wrangler 2-Door (JK)
- 2013 Jeep Wrangler 2-Door (JK)
- 2012 Jeep Wrangler 2-Door (JK)
- 2011 Jeep Wrangler 2-Door (JK)
- 2010 Jeep Wrangler 2-Door (JK)
- 2009 Jeep Wrangler 2-Door (JK)
- 2008 Jeep Wrangler 2-Door (JK)
- 2007 Jeep Wrangler 2-Door (JK)
Jeep Wrangler Unlimited 4-Door (JK)
- 2018 Jeep Wrangler Unlimited 4-Door (JK)
- 2017 Jeep Wrangler Unlimited 4-Door (JK)
- 2016 Jeep Wrangler Unlimited 4-Door (JK)
- 2015 Jeep Wrangler Unlimited 4-Door (JK)
- 2014 Jeep Wrangler Unlimited 4-Door (JK)
- 2013 Jeep Wrangler Unlimited 4-Door (JK)
- 2012 Jeep Wrangler Unlimited 4-Door (JK)
- 2011 Jeep Wrangler Unlimited 4-Door (JK)
- 2010 Jeep Wrangler Unlimited 4-Door (JK)
- 2009 Jeep Wrangler Unlimited 4-Door (JK)
- 2008 Jeep Wrangler Unlimited 4-Door (JK)
- 2007 Jeep Wrangler Unlimited 4-Door (JK)
Oracle Lighting Flush Mount Tail Lights Options
| Part Number | Catalog # | Color Options | Price | ||||||
|---|---|---|---|---|---|---|---|---|---|
| 5891-504 | 97009-9068 | Standard Red | $349.99 | ||||||
| 5891-504-T | 97009-9073 | Black Series | $368.99 |
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Oracle Lighting Flush Mount Tail Lights Reviews
I have this lights on my JL and they are fantastic.
I own a 2014 JK Unlimited. The lights are incredibly easy to install and look great. However, couple of key points. First, the instructions say the resistors come pre-mounted to brackets with clips. They are not pre-mounted. The brackets and screws are in a separate plastic bag. Its easy to figure out, just not as the instructions state.
Second, and I'm not sure where else I read this on these taillights, once installed there is a clear gap between the taillights and the exterior frame of the Jeep - so, water will be able to get in through those gaps. Oracle should include a waterproof gasket of some sort to close the gap.
Third, the original factory taillight on the drivers side has additional cable mounts built into it to keep the wiring away from the fuel tank line. This kit said it works with '07-'18 JK models, but does not include the additional wiring mounts. I ended up using velcro strips to secure the wires to the back frame of the Jeep. I believe this should have been accounted for in their design of these replacement taillights.
