Rigid Industries 20641 Ignite Flush Mount LED Backup Light Kit
Quadratec Part #:
97061-09213
Rigid Industries Part #:
20641
Description
Most vehicles have very inadequate backup lighting, which can be a major safety problem. Rigid makes it easy to add compact and powerful backup lighting to any vehicle with the Rigid Ignite™ Backup Kit. The Ignite Series Accessory Lights are small but pack a lot of power with 1000 raw Lumens in a light that measures just 1.4” x 1.4” x 2”. The Backup Light Kits are available with a pair of either flush mount or surface mount Ignite lights along with mounting brackets and related hardware. While a wiring harness is not included, the powerful LEDs in each light consume less than one amp each, so powering them is often as easy as tapping into the vehicle’s existing backup lighting circuit.
Popular Similar Items
Details
- Available in Black Only
- Rigid’s Smallest Forward Projecting Light
- Small Package, Big Output
- Low Minimum Voltage: 6-28 VDC
- IP68 Compliant
- Available only in Diffused
- Rigid Quality & Performance
- Smallest Flush Mount Light that Rigid Offers
- Easy Install
- Watts: 12
- Raw Lumens: 1000
- Lux @ 10m: 9
- Beam Distance: 59.5 m
- Peak Beam Intensity: 884.5 cd
Installation Notes
Installation Difficulty:
Level 2IntermediateUse 1.75” diameter hole saw for main hole. Place light into hole and mark locations for
mount screws. Use 3/16” drill bit for mount screw holes.
Installation Time: Less than an hour
Parts Included
- Ignite Flush Mount LED Backup Light Pair
Warranty
Limited Lifetime Warranty - Features: Flush Mount
- Color: Black
- Light Pattern: Back Up
- Lighting Type: Rectangular
- Shipping Weight: 0.6lb
- Shipping Dimensions: 9in x 5in x 2in (L x W x H)
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Rigid Industries Ignite Flush Mount LED Backup Light Kit Reviews
Matt B.
1/23/2020
Recently installed in the rear bumper and wired to work with both backup and aux switch using a 2/1 diode. The factory backup lights are terrible to the point of being dangerous. The Rigid light kit was easily installed and provides great light for reversing or for night time tasks.
Chet A.
12/10/2019
Makes backing up easier at night.
Peter S.
11/7/2020
First set, only one led worked, and swapped, customer service was brilliant got a replacement sent. but now have had on my truck for just over a month and neither work. Very disappointing since I paid for a quality product, but sadly seems is not.
Questions
Eric F.
The description says the lights can be flush mounted. At 1.4" × 1.4" × 2", - 2" being depth.
How big is the drill hole, that has to be used for the 2" of depth, to flush mount this light?
Use 1.75” diameter hole saw for main hole. Place light into hole and mark locations for mount screws. Use 3/16” drill bit for mount screw holes.
David H.
What is the water protection rating on this product?
This is IP68 rated.
