Poison Spyder Daddy Long Legs Crusher Corner Guards with LED Cutouts for 04-06 Jeep Unlimited TJ

Poison Spyder Crusher Corners protect your Jeep's vulnerable rear body corners by cladding them in rugged, high strength 3/16" plate steel armor. Crusher Corners are manufactured to hug the lines of your Jeep's body tub perfectly, forming a glove-fit with virtually no loss of valuable ground clearance. Crusher Corners are CNC laser cut from high strength 3/16" plate steel, and precision brake-formed in a single full-radius bend, for a perfect fit. Bolt holes are countersunk for the included stainless steel flat head hardware, which yields a flat, unobstructed surface to slide over obstacles. All mounting hardware is included as well as detailed installation instructions. These "Daddy Longlegs" Crusher Corners are designed to provide the same benefits as the ones that were custom designed for Poison Spyder's "Daddy Longlegs" stretched LJ. They provide for a 4" wheelbase stretch with up to a 40" tire. The longer wheelbase is key for maximizing off-road performance and climbing ability. Moving the rear axle back also improves the departure angle at the rear of the Jeep. These Crusher Corners also provide for "wheel well to wheel well" coverage (when used with "Daddy Longlegs" Rocker Knockers), providing full wrap-under protection right to the rear wheel opening. In addition to the wheelbase stretch and huge wheel opening, the wheel opening has also been moved up as high as possible, providing for eXtreme Clearance (they are a perfect match with the front DeFender XC's) and allowing for extreme articulation while maintaining a Low Center Of Gravity (LCOG). Note that all of the "Daddy Longlegs" components, including Rocker Knockers Crusher Corners&trade: and DeFender Flares, are designed to fit and work together. They may be purchased separately but are not guaranteed to fit with other manufacturer's armor products. "Daddy Longlegs" Crusher Corners require deletion of the stock taillight boxes, and replacing them with flush-mount, high-intensity LED taillights (sold separately). These LED taillights are rugged, bright, and most importantly very low profile so they won't get knocked off the Jeep by a protruding rock. If converting to LED taillights for the first time, an upgraded LED Electronic Flasher may be needed to correct the turn signal strobe timing. "Daddy Longlegs" Crusher Corners do not come with cut-outs for the stock tailgate hinges, and therefore require the use of a drop-down tailgate such as Poison Spyder's TrailGate. These Corners also require relocating the license plate from its OE location on the lower driver's side corner. We recommend locating it to the center of the TrailGate, if not running a bumper-mounted spare tire. It may be installed there by simply drilling four holes and bolting it directly to the surface of the TrailGate. If using a bumper-mounted spare tire, the license plate may be relocated to the center of the spare tire. If it is a Poison Spyder RockBrawler Rear Bumper with Tire Carrier, it already comes with a license plate mount to do this. DIY solutions may have to be found for other manufacturer's bumper/tire carriers. The LED License Plate & Third Brake Light with 6' Extension Harness may be used to illuminate the relocated license plate, if desired. IMPORTANT: This is a custom item that is built to order. Please add 2-3 weeks to normal delivery times for this item.