Stage 1 Jeep Package for 07-14 Jeep Wrangler JK

2" Spacer Suspension System
AEV's 2-inch Spacer Suspension System was designed for JK owners who want the quality associated with AEV's suspensions, but only need 2-inches of lift at an economical price. Made to clear 33" tires, AEV's System includes durable front and rear Polyurethane coil spacers, front and rear bump-stop extensions, extended sway-bar end-links and corrosion-resistant E-coated front and rear shock extension brackets.

ProCal Module
AEV's ProCal Module is a hand-held powerhouse! This essential tool provides JK owners an easy, low-cost way to make a variety of useful changes not offered by the dealer or any other re-programmer. Topping the list is the ability to correct the speedometer and gear ratio when larger tires are installed. With the speedometer left uncorrected, there is a major degradation in the performance of the stability control (ESP), transmission shifting, and engine performance. The best part of the ProCal is that it isn't just for correcting the speedometer. The Tire Pressure Monitoring System can now be recalibrated to better suit aftermarket tires without triggering the dash light. Further, the ProCal Module makes it possible to activate daytime running lamps, "one-touch" turn signals, enable a temporarily increased engine idle speed for winching, clear engine codes, and even has a feature to help align the vehicle perfectly for optimal ESP performance.

Tubeless Front Bumper
Based on the tried and true design of the JK Premium Front Bumper, the stylish stamped steel face of the new JK Tubeless Front Bumper is built to withstand all the rocks, mud and brush you can throw at it while providing a clean, European look. With full vehicle width and an optional Skid Plate, you get the best front-end protection in the industry with a design that melds seamlessly with your JK Wrangler. The heavy-duty chassis mounted tow points and an optional Winch Mount will help you out of sticky situations, and you'll look good doing it. The JK Tubeless Front Bumper includes auxiliary light mounts, factory fog light mounts, chassis-mounted tow-points and crush cans. It also receives an OE-level double stage paint process to help keep Mother Nature at bay. AEV's JK Tubeless Front Bumper now takes its place as the industry's second stamped steel bumper – behind AEV's original JK Premium Front Bumper. Like the original, it offers style and protection like no other.

Front Bumper Skid Plate
Replace your plastic factory front valence with this tough AEV 1/8" thick stamped steel skid. Factory styling protects your crossmember steering and swaybar from offroad obstacles. Works with AEV Front Bumpers for JK. Will not interfere with oversized tires. Rust inhibiting E-coating is top coated with an attractive textured black powder paint finish. Skid plates come complete with installation hardware. Made in USA.

Winch Mounting Kit
AEV's JK Winch Mount works with the AEV Premium Front Bumper and is designed to fit Warn winches up to 9,500 lbs (does not fit the powerplant).

Winch Plate Delete Kit The Winch Delete Cover Plate will closeout the opening on the top of your AEV Front Bumper if you run the bumper without a winch. Made in USA.

Rear Bumper Always a leader in innovation, AEV introduces its new JK rear bumper and a list of features including first-ever, two built-in 2.3 gallon water storage tanks with optional Pump Kit. Optional Tire Carrier opens as one with tailgate which holds up to a 40-inch tire, Wide, built-in rear step with non skid surface, Bomb-proof 3/16" thickwall, mandrel bent chassis-mounted corner protection tubes, Durable Zinc-rich powder primer and texture black powder coat finish on all metal surfaces, ½" thick D-Shackle mounting points. AEV's Rear Bumper also offers secure High-Lift jacking points with jack tongue retainers, keeping you safe under work conditions. Made in USA.

Painted to Match Hood We offer the AEV Heat Reduction Hood exclusively painted to match your Wrangler JK. AEV all steel Heat Reduction Hood provides both fresh intake air and critical cooling for the new Wrangler. This hood's special design is not only functional, but sets your vehicle apart from the rest with aggressive styling. The AEV Heat Reduction Hood also includes three mesh vent areas in Black.

Pintler Wheels Made from the highest quality alloy, AEV wheels add style as well as functionality to your vehicle. Each wheel features recessed valve stems for added off-road protection. All AEV wheels are a "hub-centric" design.