Home » Jeep Lift Kits & Suspension » Shackles & Hardware » Shackle Reversal Kits » Mountain Off-Road Standard Shackle Reversal Kit with Bolt On Mounts for 76-86 Jeep® CJ-5, CJ-7 & CJ-8 Scrambler

Mountain Off-Road Standard Shackle Reversal Kit with Bolt On Mounts for 76-86 Jeep® CJ-5, CJ-7 & CJ-8 Scrambler

Starting at
$313.64
Description
The M.O.R.E. Jeep® CJ shackle reversal system is all bolt on, no welding construction with all hardware included. A shackle reversal system or "SRS" allows the front suspension to travel in a much more natural action when the spring compresses. The front pivot brackets are fully welded, painted and ready to bolt into existing holes in your CJ frame. Stock 2" width springs are required. Spacers are provided for the purpose of different winch mounting possibilities, and / or if you want to use M.O.R.E. frame plates (FP300). The mounting method for the shackles is unique with this system. The Shackle hanger is a complete Bolt-On bracket that is adjustable (fore & aft) on the frame. This is important for all the different leaf spring combination's. It will work with or without a lift kit, spring under or over the axles. This S.R.S will lift the front of your Jeep one and a half inches. No welding required. The front driveshaft will need to be modified with a long travel slip in stub. Stubby Kit versions with more front approach clearance also available.
Details

Why install a shackle reversal system? Because it allows the front suspension to travel in a much more natural action when the spring compresses. In stock form when the front tire comes in contact with an obstruction (shackles in front of the front axle housing), the impact is partially transmitted back to the frame via the solid rear pivot point. Reversing the pivot point to a point in front of the axle, it allows the impact to be better absorbed by the spring and shackle. The result is a more natural suspension flow over the obstacle, thanks to your Jeep shackle reversal system. At higher speeds, a smoother ride and improved handling are noticeable, while less wandering and darting are some of the advantages.

All M.O.R.E. Jeep® shackle reversal systems have a very important design feature built into the new front pivot brackets. They are designed to move the front axle forward from the stock location. When the shackle is reversed to behind the front axle, it will swing rearward and the tire will move slightly aft as the suspension compresses. Pushing the wheelbase forward will help keep the tire from contacting the fender during suspension compression. This is the only correct way to design a shackle reversal system. With this in mind, the front drive shaft will have to have a longer travel slip-yoke installed (in most cases) by a professional drive line shop.

The bracketry on the shackle reversal system is manufactured from .250" thick steel, cut with CNC laser, for .004 of accuracy. All pieces of the Jeep® shackle reversal system are precision bent to exact tolerances and assembled in jigs, and then M.I.G. welded. All hardware is grade 5. Complete instructions with several pictures are included.

Installation Notes
Installation Difficulty:
Level 3Advanced

1. Drilling Required.
2. Cutting Required.

Installation Time: 4-6 hours
Parts Included

Spring Brackets
Frame Spacer Plates
Shackle Plate
Shackle Tubes
Shackle Brackets
Shackle Bushings
Installation Hardware

  • Features: Shackle
  • Lift Height: 2.00
  • Lift Height Range: 0 - 2.5 inch
  • Location: Front
  • Upper/Lower: Shackle
*Please make a selection above to view specs on a specific product
  • Jeep CJ-7

  • 1986 Jeep CJ-7
  • 1985 Jeep CJ-7
  • 1984 Jeep CJ-7
  • 1983 Jeep CJ-7
  • 1982 Jeep CJ-7
  • 1981 Jeep CJ-7
  • 1980 Jeep CJ-7
  • 1979 Jeep CJ-7
  • 1978 Jeep CJ-7
  • 1977 Jeep CJ-7
  • 1976 Jeep CJ-7
  • Jeep CJ-8

  • 1985 Jeep CJ-8
  • 1984 Jeep CJ-8
  • 1983 Jeep CJ-8
  • 1982 Jeep CJ-8
  • 1981 Jeep CJ-8
  • Jeep CJ-5

  • 1983 Jeep CJ-5
  • 1982 Jeep CJ-5
  • 1981 Jeep CJ-5
  • 1980 Jeep CJ-5
  • 1979 Jeep CJ-5
  • 1978 Jeep CJ-5
  • 1977 Jeep CJ-5
  • 1976 Jeep CJ-5
Part NumberCatalog #OptionPrice
7686-412590.0120Black Powdercoat$324.45
7686-4NP12590.0121Bare Steel$313.64
Share Your Thoughts
Review Summary
Shared Media
Questions