Home » Jeep Electrical » Ignition System » Ignition Systems & Modules » MSD Ignition 6430 6ALN Extreme Duty Ignition Control System

MSD Ignition 6430 6ALN Extreme Duty Ignition Control System

Catalog #: 17610.1009
MSD Ignition Part #: 6430
Description
The MSD 6ALN was designed with NASCAR racing in mind. In fact, the capacitive discharge high power ignition is NASCAR approved! The "N" Series Ignitions feature the mandatory 6-Pin Weathertight connector to meet NASCAR's ignition wiring rule, 20-6.1. This special connector provides a tight, positive lock ing connection with individual seals to keep dirt and moisture away from each connection. All of the MSD's primary wiring meets MIL-86A specifications with special tinned conductors for superior crimps. Inside the strong cast aluminum housing, the multiple sparking CD circuits are encased in a clear two part silicone elastomer for the ultimate in vibration protection. A special clear base plate is also installed for easy tech inspection.
Details
  • Multiple spark, capacitive discharge ignition control
  • Designed for circle track racing with NASCAR mandated connectors and clear epoxy potting compound for vibration protection
  • 6-pin Weathertight connector, mandatory for NASCAR use
  • Circuit board is encased in a clear two part silicone elastomer
  • Clear plastic base plate for easy tech inspection
  • Built-in Soft Touch Rev Control is adjustable with RPM Modules
  • Multiple sparks for 20 degrees of crankshaft rotation
  • Works on 12 - 18 volt electrical system
  • Accepts breaker points, amplifier and magnetic pickup trigger inputs
  • 470 primary voltage output to coil
  • 110 millijoules per spark up to 15,000 RPM
  • Programmable for 4, 6, or 8-cylinders by cutting red/blue wire loops
  • Supplied with rubber shock mounts
  • Supplied with 3,000, 6,000, 7,000 & 8,000 RPM Modules
  • No CARB Exemption Order Number
Installation Notes
Installation Difficulty:
Level 2Intermediate
Installation Time: 1-2 hours
Parts Included

1 - MSD 6 Series Ignition
1 - Harness, PN 8860
1 - Harness, PN 8861
1 - 18" Ground Wire
1 - White Jumper
1 - Red Jumper
4 - 45° Faston Terminals
4 - #8 x 3/4" Screws
2 - 10-32 x 1/2" Screws
4 - 10-32 Hex Nuts
6 - #10 Lock Washers
1 - 100V/1A Diode
4 - Wire Splicers
2 - Wire Ties
1 - Faston Receptacle
2 - Faston Straight Terminals
4 - Vibration Mounts and Hardware
4 - RPM Modules, 3,000, 6,000, 7,000, 8,000

Share Your Thoughts
Review Summary
Shared Media
Questions