Home » Jeep Driveline » Lockers » Full Time Lockers » PowerTrax® 2410K Lock Right Locker with Performance Cross Shaft for 71-06 Jeep® Vehicles with 30 Spline Dana 44 Open Differential Axles

PowerTrax® 2410K Lock Right Locker with Performance Cross Shaft for 71-06 Jeep® Vehicles with 30 Spline Dana 44 Open Differential Axles

Catalog #: 26104.104
PowerTrax® Part #: 2410K
Description
The Lock Right transfers power from slipping wheels to the ones with traction. These kits replace standard differential spider gears with a ratcheting assembly that transfers torque in a reversed fashion from normal differentials. Lock Right works automatically, so you can keep your hands on the wheel - and your mind on the terrain. These are complete kits with clear & helpful installation instructions. Because the ring & pinion are not disturbed, no gear lash adjustments are required.
Details

The POWERTRAX LOCK-RIGHT Locker is the original locking differential that could be easily installed in existing case assemblies without any special tools or setup equipment. It has been widely used in demanding off-road applications around the world requiring extreme traction output and high-strength.

Because the LOCK-RIGHT eliminates wheel spin-up and therefore its associated driveline trauma is negated, the strength and integrity of its surrounding original case and other driveline components are, in effect, substantially increased. Cases that occasionally fail with open or limited-slip/posi differentials become one of the strongest links in the drive train when equipped with the POWERTRAX LOCK-RIGHT LOCKER.

The LOCK-RIGHT has been used in the harshest conditions around the world by hard-core off-roaders, in towing applications, and even United Nation vehicles in rugged terrain.

For traction output, strength and durability, the POWERTRAX LOCK-RIGHT Locker. rivals much more expensive competitive lockers sold only as complete case replacement assemblies. It is a leading product because the LOCK-RIGHT delivers as much traction output, its end assembly is exceptionally strong, is much less expensive, and does not require professional installation (because the complete case assembly does not have to be replaced and realigned with precision calibration equipment). An excellent choice for off-road vehicle applications, performance enthusiasts also began using the LOCK-RIGHT LOCKER to satisfy their extreme traction requirements for racing, hot-rods and muscle cars.

The LOCK-RIGHT's operation is fully automatic. Designed to send the engine power to the wheels with the most traction, the LOCK-RIGHT will help get you where you want to go. While traveling straight the LOCK-RIGHT will lock the axles together similar to a spool. However, when the wheels need to differentiate in a turn, the LOCK-RIGHT will allow the outside wheel to rotate faster to complete the turn. The internal gears on the LOCK-RIGHT will overrun each other to allow this differentiation.

When operating off-road, the LOCK-RIGHT will always send the engine power to the wheels that need it most. For example, if you are rock crawling and one wheel is in the air (complete loss of traction), the wheel on the ground will receive the engine power and keep you going. Whether it be snow, sand, mud, ice, etc... the LOCK-RIGHT will give you the traction you need.

Although smoother than other competitive locking differentials, the brute force characteristics of the POWERTRAX LOCK-RIGHT Locker limit general application in less tolerant and more mainstream applications. In some vehicles, you will hear a light clicking noise as the gears are overrunning themselves and allowing the wheels to differentiate in a turn. This is normal of most lockers on the market today. We recommend the LOCK-RIGHT for vehicles that are primarily driven in severe driving conditions or are used for recreational off-road. For vehicles that are driven daily or require more mainstream application, the POWERTRAX TRACTION SYSTEMS offer a quieter and smoother performance. Please see the POWERTRAX® TRACTION SYSTEMS page.

Installation Notes
Installation Difficulty:
Level 3Advanced
Installation Time: 2-3 hours
Parts Included

Lock Right Locker System
Performance Cross Shaft

  • Axle Model: Dana 44
  • Axle Position: Front, Rear
  • Jeep Wrangler (TJ)

  • 2006 Jeep Wrangler (TJ)
  • 2005 Jeep Wrangler (TJ)
  • 2004 Jeep Wrangler (TJ)
  • 2003 Jeep Wrangler (TJ)
  • 2002 Jeep Wrangler (TJ)
  • 2001 Jeep Wrangler (TJ)
  • 2000 Jeep Wrangler (TJ)
  • 1999 Jeep Wrangler (TJ)
  • 1998 Jeep Wrangler (TJ)
  • 1997 Jeep Wrangler (TJ)
  • Jeep Wrangler Unlimited (TJ)

  • 2006 Jeep Wrangler Unlimited (TJ)
  • 2005 Jeep Wrangler Unlimited (TJ)
  • 2004 Jeep Wrangler Unlimited (TJ)
  • Jeep CJ-5

  • 1975 Jeep CJ-5
  • 1974 Jeep CJ-5
  • 1973 Jeep CJ-5
  • 1972 Jeep CJ-5
  • 1971 Jeep CJ-5
  • Jeep CJ-6

  • 1975 Jeep CJ-6
  • 1974 Jeep CJ-6
  • 1973 Jeep CJ-6
  • 1972 Jeep CJ-6
  • 1971 Jeep CJ-6
  • Jeep Cherokee (XJ)

  • 1993 Jeep Cherokee (XJ)
  • 1992 Jeep Cherokee (XJ)
  • 1991 Jeep Cherokee (XJ)
  • 1990 Jeep Cherokee (XJ)
  • 1989 Jeep Cherokee (XJ)
  • 1988 Jeep Cherokee (XJ)
  • 1987 Jeep Cherokee (XJ)
  • Jeep Comanche (MJ)

  • 1992 Jeep Comanche (MJ)
  • 1991 Jeep Comanche (MJ)
  • 1990 Jeep Comanche (MJ)
  • 1989 Jeep Comanche (MJ)
  • 1988 Jeep Comanche (MJ)
  • 1987 Jeep Comanche (MJ)
  • Jeep Wagoneer (SJ)

  • 1991 Jeep Wagoneer (SJ)
  • 1990 Jeep Wagoneer (SJ)
  • 1989 Jeep Wagoneer (SJ)
  • 1988 Jeep Wagoneer (SJ)
  • 1987 Jeep Wagoneer (SJ)
  • 1986 Jeep Wagoneer (SJ)
  • 1985 Jeep Wagoneer (SJ)
  • 1984 Jeep Wagoneer (SJ)
  • 1983 Jeep Wagoneer (SJ)
  • 1982 Jeep Wagoneer (SJ)
  • 1981 Jeep Wagoneer (SJ)
  • 1980 Jeep Wagoneer (SJ)
  • 1979 Jeep Wagoneer (SJ)
  • 1978 Jeep Wagoneer (SJ)
  • 1977 Jeep Wagoneer (SJ)
  • 1976 Jeep Wagoneer (SJ)
  • 1975 Jeep Wagoneer (SJ)
  • 1974 Jeep Wagoneer (SJ)
Share Your Thoughts
Review Summary
Shared Media
Questions