Crown Automotive 52104110 Hydraulic Clutch Control Assembly for 94-96 Jeep Cherokee XJ w/ 2.5L & 4.0L

Line looks nice and installed easily. Main issue is the 180 degree bend that is needed on the lower end of the assembly. There is no real way to do this without kinking the line. The design just needs to be looked at. Simple fix to correct and avoid problems during install.

Line was kinked at the slave end when I got it. So now I am next day airing a line to me.
This is not a TRUE stainless steel type line. It is a hard plastic wrapped with stainless steel braid. Very disappointed, as now it all needs to come out. And re-bleed the whole system with a new hose.

this photo is not what you will receive. this in fact is the OEM pictured here. do yourself a favor and get the OEM part from the dealer. they are still available. this is a common service item selling 16 a week nationally according to the dealer near me. I received 2 of these. the first one had a kink in the line right at the slave. second one kept sucking air then finally blew out. btw, I am a former professional mechanic and am well versed in bleeding procedures. total pos.good luck.