Home » Jeep Steering & Brakes » Steering Linkage » Heavy Duty Steering Kits » Rugged Ridge Heavy Duty Tie Rod Kit for 87-95 Jeep® Wrangler YJ

Rugged Ridge Heavy Duty Tie Rod Kit for 87-95 Jeep® Wrangler YJ

The Quadratec® Difference
Catalog #: 56118.103
Rugged Ridge Part #: 18050.83
These Tie Rod Assemblies provide virtually 1-ton strength with factory tapered ends, so no modification is required! The tube is 1.25" OD SAE steel with .25" wall thickness that is cold rolled, pierced and drawn through dies. This bolt-on tie rod and drag link solution is perfect for preventing bent tie rods from off roading with larger tires. All rod ends come complete with dust shields, castle nuts, cotter pins, 2 jamb nuts and zerk fittings.

Rugged Ridge's steering linkage assembly "dwarfs" the factory original and give you virtually 1-ton strength with a factory tapered end, so no modifications are necessary! This is a bolt-on solution for preventing bent tie rods and drag links from wheeling with larger tires.
Upgrade to HD Steering Dampner Bracket.

Installation Notes
Installation Difficulty:
Level 4Experts Only

With any lift over 2" a drop pitman is recommended.
Slight Rubbing may occur with factory Jeep® rims.
NOTE: All responsibility for inspecting, installing, tightening, and the application of proper OE torque specifications rest solely with the owner.

Installation Time: 2-4 hours
  • Jeep Wrangler (YJ)

  • 1995 Jeep Wrangler (YJ)
  • 1994 Jeep Wrangler (YJ)
  • 1993 Jeep Wrangler (YJ)
  • 1992 Jeep Wrangler (YJ)
  • 1991 Jeep Wrangler (YJ)
  • 1990 Jeep Wrangler (YJ)
  • 1989 Jeep Wrangler (YJ)
  • 1988 Jeep Wrangler (YJ)
  • 1987 Jeep Wrangler (YJ)
Share Your Thoughts
Review Summary
Shared Media