« Back to product
Mark C.
I’m running Nitto’s 35/12.5 r18 light truck on 18” black rhino Abrams. My current set up is about 3” out from the fender. I like some stick out but unfortunately hard park downtown and driving etc…now that my work requires me. Hoping this set of wheels/ Nitto tires will be an inch or so out from the fenders? If not is there a backspacing that I should be looking for?
With the same size of tire, which would have to for the 17" wheel OD the '41 wheel has, that combo would come in 1.1" closer to the center of the Jeep. Unfortunately, the potential for turning radius rub is more likely to occur if you run too large of a tire and a higher backspace wheel. Thanks for your inquiry.
MATTHEW M.
Do these come with the blank center cap like the photo?
Yes, they do come with the blank center cap. Thanks for your inquiry.
Dave A.
Will these fit Bridgestone Dueler A/T P255/70R18/122T/M+S tires?
No, sorry. Your tire will have to be mounted on an 18" sized wheel. This wheel is not offered in a correct size for it. Thanks for your question.
David P.
Will the Jeep center caps work in these?
Yes, they will. Thanks for your inquiry.
Patrick B.
Will these fit Goodyear Duratrac 255/75/17 tires?
Yes, they will fit with one another. Thanks for your inquiry.
Andrew P.
My 2016 Wrangler failed PA safety inspection last week because my tires stick out 1 inch past the fenders. Will these wheels correct that? My tread has to be no more than flush with the fenders. I'm running 315 70 17.
If the wheel you are running now, had a backspace of 4.25" or so, this would push you inward .95". We need to know what wheel backspace you have, to determine what direction the change in backspace will accomplish. Thanks for your inquiry.
Corey B.
I have a 2019 JLUR with stock wheels. How much will these wheels stick out? Thank you
The wheel's outer edge will be outward 2". 1" from the difference in backspace from the stock wheel and 1" from the wheel width over the factory sizing. Thanks for your inquiry.
Kevin S.
Did you quit making these in bronze?
Yes, the Bronze color is no longer available. Sorry.
Steven S.
Will the factory wheel lug nuts work with these wheels?
Factory lugs can be used with this wheel. Thanks for your inquiry.
Josh B.
will these fit my 2010 jeep commander?
They will fit on the Jeep, but they will stick out further by a fair amount and are likely to stick out from fender wells. Could be DOT issues with exposed tire tread so use caution. A factory Commander wheel Is either 17" x 7.5" or 18" x 7.5" This wheel is an inch wider and the backspace is 5.2 Factory wheel should have in most cases 6" of backspace. So, your outer rim will be out around 1.75" further out, give or take 1/4".