« Back to product
Stanley H.
I do not have any factory tierod bars or tie rod ends, I see where the adjustment end body connects but the rod end while require a clamp. My set up is rock jock current lynx can you suggest a clamp connection for me to use the Nexus 2.2 steering stabilizer with.
Since your RockJock Currectlync tie rod uses a 42mm (approx. 1.654") outer diameter tube, you will need a heavy-duty clamp designed specifically for that tube size to mount the Teraflex Falcon Nexus EF 2.2 Fast Adjust Steering Stabilizer.
Here are the best options to connect your steering stabilizer:
RockJock Currectlync Steering Stabilizer Shock Bracket Kit (Part # RJ-401001-101): Specifically manufactured by RockJock to fit their 42mm Currectlync tie rod tubes. It features a forged 4130 chromoly design and an adjustable mounting gap that accommodates aftermarket stabilizer shafts.
Falcon 1-5/8" Steering Stabilizer Tie Rod Clamp Kit (Part # 99-01-01-158): Teraflex's proprietary heavy-duty clamp built to fit 1-5/8" (1.625" - 1.654" range) aftermarket heavy-duty tie rods, ensuring an exact bolt-on match for the eyelet of your Nexus EF stabilizer.
Here are the best options to connect your steering stabilizer:
RockJock Currectlync Steering Stabilizer Shock Bracket Kit (Part # RJ-401001-101): Specifically manufactured by RockJock to fit their 42mm Currectlync tie rod tubes. It features a forged 4130 chromoly design and an adjustable mounting gap that accommodates aftermarket stabilizer shafts.
Falcon 1-5/8" Steering Stabilizer Tie Rod Clamp Kit (Part # 99-01-01-158): Teraflex's proprietary heavy-duty clamp built to fit 1-5/8" (1.625" - 1.654" range) aftermarket heavy-duty tie rods, ensuring an exact bolt-on match for the eyelet of your Nexus EF stabilizer.
Alan W.
Will this fit a 2021 Wrangler 392
Yes, the Teraflex Falcon Nexus EF 2.2 Fast Adjust Steering Stabilizer will fit a 2021 Jeep Wrangler Rubicon 392.
This stabilizer is designed specifically for the Jeep Wrangler JL and Gladiator JT platforms. Because the 392 Rubicon uses the same front axle and steering geometry as other JL models, this part is a direct bolt-on.
This stabilizer is designed specifically for the Jeep Wrangler JL and Gladiator JT platforms. Because the 392 Rubicon uses the same front axle and steering geometry as other JL models, this part is a direct bolt-on.
Bill D.
Is the the 2.1 EF stabilizer adjustable?
No, the Falcon Nexus EF 2.1 steering stabilizer features a fixed, pre-set damping profile optimized for daily driving and general off-road use. If you are looking for an adjustable option with multiple firmness settings (such as soft, medium, and firm adjustments via an inline adjustment knob), you would want to step up to the Falcon Nexus EF 2.2 model instead.
Jeffrey P.
Will this fit the 2024 Wranglers?
Factory steering stabilizer for 2024 is a different part number for Jeep Mopar, so at this time we would suggest waiting for Teraflex to test and definitively state. Thanks for your inquiry.
All Offroad Products For Jeeps (.
will this fit RIGHT HAND DRIVE JL wrangler?
Unfortunately, it does not. The mounting bracket on the body side makes this part LHD only.