« Back to product
David P.
I need the two locks for these doors: Key Parts Half Steel Door for 87-95 Jeep Wrangler YJ
Key Parts factory-style replacement half doors are built strictly to OE specifications, meaning they do not come with lock cylinders and require factory-spec replacement hardware.
The correct lock components you need depend on the exact year of the original doors you are replicating:
For 1987–1990 YJ Style Half Doors: You will need the Crown Automotive 8122874K2 lock cylinder set.
For 1991–1994 YJ Style Half Doors: You will need a standard paddle-handle style 2-door lock kit specific to those intermediate years.
For 1995 YJ Style Half Doors: These transition years use the same style found on later TJs. You can use the Mopar 4778123 Non-Keyed Lock Cylinder kit, which comes blank so a locksmith can tumble it to match your ignition key, or an aftermarket equivalent pre-keyed set like the Crown Automotive 5003843AAK.
The correct lock components you need depend on the exact year of the original doors you are replicating:
For 1987–1990 YJ Style Half Doors: You will need the Crown Automotive 8122874K2 lock cylinder set.
For 1991–1994 YJ Style Half Doors: You will need a standard paddle-handle style 2-door lock kit specific to those intermediate years.
For 1995 YJ Style Half Doors: These transition years use the same style found on later TJs. You can use the Mopar 4778123 Non-Keyed Lock Cylinder kit, which comes blank so a locksmith can tumble it to match your ignition key, or an aftermarket equivalent pre-keyed set like the Crown Automotive 5003843AAK.
Caleb W.
Where do I find all the neccesarry bolds and screws to use with the half door and panel I have? I also have some of the hardware excluding strike pin and handle latch rods. but nothing with screws
You can find what we have here: Jeep Door Replacement Parts
Miguel G.
Es posible comprar la puerta completa?
Con manija, sello, tirador, etc
No, lamentablemente no tenemos una solución completa. Esos componentes están separados de los que tenemos disponibles. Gracias por tu consulta.
David G.
Do these doors have the necessary holes for installing soft top hardware?
No, they are not pre-drilled for the use of 88-95 door rail kit. Thanks for your inquiry.
Bruno C.
peut on poser c'est demi porte sur jeep tj de 2003
This will not fit 2003 TJ's. You need part # 55011.2003.
Jonathan C.
Will this work with a 1993 factory hard top? and what uppers will work with a hard top with these doors?
No, it will not.
Paul W.
do these lower doors accepts any upper doors?
Yes they have provisions for factory pin inserts and factory style upper doors or aftermarket brands that will fit factory such as Bestop upper sliders