« Back to product
David W.
I have a roof rack that extends forward just to the rear seam of the freedom tops. Would that interfere with the operation of the Sunrider?
Whether your roof rack will interfere depends on the vertical clearance and mounting style of your rack.
How the Sunrider Operates
When you flip the Sunrider back, the fabric and its metal frame fold into a "Z" shape. In its fully open position, the assembly rests on top of the rear hardtop section, specifically just behind the main roll bar (soundbar) area.
Stack Height: When folded open, the Sunrider typically stands about 4 to 6 inches tall from the surface of the hardtop. If your roof rack sits lower than this height over the rear section of the Jeep, the top will hit the rack before it can fully open and latch into its safety straps.
Rear Seam Location: You mentioned your rack extends to the "rear seam of the freedom tops." This is the exactly where the Sunrider needs to land when open. If the rack has a front crossbar or a "wind fairing" that sits directly over that seam, it will almost certainly block the top from folding back.
Interference Factors
Platform Racks (e.g., Rhino-Rack, Front Runner): These often extend over the entire roof. Unless the rack is mounted very high (usually over 6 inches of clearance), you cannot flip the Sunrider open.
Basket-Style Racks: If your rack is a basket that starts at the seam and has a vertical front wall, it will prevent the Sunrider from reaching its final resting position.
Crossbar Systems: If you only have crossbars and the front one is placed behind the Sunrider's "landing zone," you should be fine.
How the Sunrider Operates
When you flip the Sunrider back, the fabric and its metal frame fold into a "Z" shape. In its fully open position, the assembly rests on top of the rear hardtop section, specifically just behind the main roll bar (soundbar) area.
Stack Height: When folded open, the Sunrider typically stands about 4 to 6 inches tall from the surface of the hardtop. If your roof rack sits lower than this height over the rear section of the Jeep, the top will hit the rack before it can fully open and latch into its safety straps.
Rear Seam Location: You mentioned your rack extends to the "rear seam of the freedom tops." This is the exactly where the Sunrider needs to land when open. If the rack has a front crossbar or a "wind fairing" that sits directly over that seam, it will almost certainly block the top from folding back.
Interference Factors
Platform Racks (e.g., Rhino-Rack, Front Runner): These often extend over the entire roof. Unless the rack is mounted very high (usually over 6 inches of clearance), you cannot flip the Sunrider open.
Basket-Style Racks: If your rack is a basket that starts at the seam and has a vertical front wall, it will prevent the Sunrider from reaching its final resting position.
Crossbar Systems: If you only have crossbars and the front one is placed behind the Sunrider's "landing zone," you should be fine.
Pauline H.
Is it possible to keep this on year round?
Yes, it’s designed for year-round use and can withstand rain, sun, and moderate snow. Thank you for your inquiry.
Ted D.
Can you leave the Sunrider for Hardtop on the Jeep without the hardtop on?
No. You will have to remove the SunRider to get the hardtop off.
Linda D.
Does this fit a 2022 Rubicon 4 door.
Does it have a rebate available.
Yes, this fits a 2022 2-door or 4-door in all trim packages. Rebates can be submitted at https://bestoprewards.com/
Kris S.
What’s the difference between twill and black diamond for the tops?
Here is a great resource for understanding the differences in soft top material: What Is The Best Material For A Jeep Wrangler Soft Top?
Jeff G.
email received on Sunrider for Hardtop says there is a rebate available, except I don't see any literature on Quadratec about this, how do we go about getting the rebate?
Rebates for Bestop Products can be found and submitted at Bestop Rewards
Juliane R.
Will this fit the 2024 Jeep Wrangler 4xe?
Yes, it will.
Dana T.
I had a Bestop sun-rider flip up top that was on my 2021 Gladiator. I have sold the jeep and bought a 2024 Gladiator and it looks like the bestop will not fit the new rig; the sound bar is different. Is there a conversion kit or any way to make the top fit the new rig?
These fit the 2024.
Anthony F.
Bestop Sunrider for Hardtop for 18-24 Jeep Wrangler JL & Gladiator JT…per the description on the web page indicates…does not fit 2025…I thought there’s no difference between 2024 freedom top and a 2025…before I purchase I like to confirm it will fit on a 2025 without no alternations…thanks
Bestop has now confirmed this DOES fit the 2025.
Ron H.
I have a spider shade over the front cabin. Can I retain that with the sunrider?
Yes, you'll be able to continue to use the spider shade.