« Back to product
Eric W.
Are adjustable track bars recommended for this or is the axle shift negligible.
Thanks
For the Dynatrac EnduroSport 2" Lift Kit, adjustable track bars are generally recommended but not strictly required. While the axle shift at 2 inches is relatively small, adding an adjustable track bar is the only way to perfectly re-center the axle and optimize your Jeep's handling.
Negligible vs. Noticeable: At a 2-inch lift height, your axle will typically shift about 1/8" to 1/4". For many owners, this is visually negligible and does not significantly impact daily driving or tire wear.
Negligible vs. Noticeable: At a 2-inch lift height, your axle will typically shift about 1/8" to 1/4". For many owners, this is visually negligible and does not significantly impact daily driving or tire wear.
Khalid A.
Dynatrac Endurosport 2" Suspension Lift Kit
Can be fit with rubicon jl 4 doors 2.0L (2018)?
This Dynatrac EnduroSport suspension lift kit has not been tested on and is not recommended for use on 2-door Jeep Wranglers, or any models with a powertrain other than the 3.6L V-6 gasoline engines. This package does not fit with Jeep Wrangler Rubicon 392 or 4xe models.
Rami R.
will this fit a 2021 gladiator?
It will not Sorry, the Gladiator suspension shock valving and spring rates are different. We offer JT Specific suspension however.
Daniel R.
do you need new lower arm controls
No, they are not required. Thanks for your inquiry.
Yoni T.
can use in 2020yr JLR 2 door unlimited rubicon?
Yes, if equipped with 3.6L Gas engine. Thanks for your inquiry.
Daniel F.
Are the swaybar links quick disconnect?
No, they are not. Thanks for your inquiry.
Logan M.
Will this lift kit fit a 2020 JLU Sahara with the 2.0 Liter
It is not recommended for any other models other that ones equipped with the 3.6L gas engine. Thanks for your inquiry.
Marco G.
Does this kit fit JL unlimited 80th anniversary with 2.0L enginee?
Yes it will. Thanks for your inquiry.
Garry F.
I wanted to make sure the Dynatrac Endurosport 2 inch suspension lift will fit a Wrangler unlimited Rubicon 2022 model? Will it require lower control arms?
Thank you for your time.
The addition of lower control arms would increase adjustability, but are not required for 2" of lift. A great addition, in lieu of control arms, to any suspension lift is AEV NJL20500AB Stamped Geometry Correction Brackets for 18-22 Jeep Wrangler JL & Gladiator JT. Thank you for the question
Brandyn B.
Will this fit a 2018 Jeep JLU 2.0L
No, it is listed for the 3.6L only. Thanks for your inquiry.