Reviews for Go Rhino 331201T Rockline Winch Ready Front Bumper with Overrider for 07-20 Jeep Wrangler JL, JK & Gladiator JT

Love the look, can't wait to install!

Love this bumper. Did have to put in 1in spacers to clear the 35s. I have a 2.5in lift and tires rubbed at full flex hard turns.

I just installed this Go Rhino Rockline front bumper. The installation is pretty easy. I recommend installing the skid plate at the same time. Keep everything loose until you tighten the main bumper mounting bolts. Be sure to start the lower skid plate mounting bolts first or you’ll need to loosen everything else up. It sits much lower on my 2019 Wrangler Unlimited Rubicon. I’m not sure why, but I have reached out to Go Rhino for their input. It still looks fantastic and provides much better protection than the factory “bumper.”

Easy to install all the lights are behind the wire grills for protection

Bumper is not made of 3/16 steel. The area you mount the winch to is 3/16 but the rest of the bumper is maybe 1/8" or 10ga steel. Easy to mount and looks great, fits the 2019 JL Unlimited Sahara perfectly. I have a 2 1/2" lift with 35x12.50 tires, tires clear the bumper on flat surface but do rub at full turn with any suspension flex. Will be adding a spacer to help with clearance.

2011 JK sahara unlimited: no rubbing on 31’s, looks absolutely awesome—totally unique looking and a lot of people ask where you got it. After being mounted for 2 weeks, I have noticed that all of the mesh grill screws are rusting?? I’m not sure why, I live in dry central Texas, so other than that, in my opinion, huge quality concern, I like the bumper with the overrider bar.

Love the Bumper, however on the Rubicon if your going to put any larger tires on they will rub. My fix for this was to have plates made and move the bumper out 2.5". It does bend easier than I would have thought and plates behind the lights to keep the mud and dirt out will be a good addition.

Really nice bumper, stands out and makes the Jeep seem a bit tougher/ rugged. Ended up getting a 4inch lift since 33’s barley cleared. Went with KC lights for the bumper which turned out very nice.

Well, at first I absolutely loved this bumper. I looks super cool and people are always asking about it. Its actually my second (a deer took out my first one as soon as I got it mounted. However, it saved my jeep completely). Today for the first time I disconnected my sway bar and hit the trails and that's when things went very wrong. While trying to make turns during articulation the front wheels hit the bumper even at slight turning radiuses. Don't buy if you plan on serious wheeling. I have a 2018 JL Sahara with Mopar 2inch lift and 35in tires.

The bumper looks great but doesn't fit. Its well made and install was easy for a novice. However, it does not fit a 2018 JL Sport Unlimited with 35" Tires. I got the bumper on and as soon as I tried to turn into a parking spot the bumper tried to take a chuck out of tires. Fair warning to future buyers, I have a 2.5" lift with 35" Dick Cepek Fun Country tires and you will get some rubbing. Will try to return and get a different full-width bumper.