« Back to product
Jeff B.
I really want to tighten up the steering it’s all been checked. No wear. Jeep is completely stock Jl 2020 diesel. I just don’t feel comfortable @ 70 on the highway. I use this as a two vehicle behind my RV with a rated tow master. Kit. See any problem
There are a lot of variables that could be contributing to a loose steering. I can't tell you what on your Jeep specifically needs to be corrected, but I can give you ideas of what may be the cause and what may need further evaluation:
Worn Tie Rod Ends
Damaged Steering Gear Box
Worn Ball Joints
Steering Shaft Issues
Loose Steering Box Mounting
Steering Stabilizer Issues
Worn Track Bar Bushings
Worn Control Arm Bushings
Improper Wheel Alignment
Worn Wheel Bearings
Improper Tire Pressure
Frame Issues
Worn Tie Rod Ends
Damaged Steering Gear Box
Worn Ball Joints
Steering Shaft Issues
Loose Steering Box Mounting
Steering Stabilizer Issues
Worn Track Bar Bushings
Worn Control Arm Bushings
Improper Wheel Alignment
Worn Wheel Bearings
Improper Tire Pressure
Frame Issues
Abhishek B.
can it be fitted on right hand drive model(India) also? as I have 2022 wrangler JI 4 door right hand drive
The Fox Racing Shox 983-02-148 (Factory Race Series 2.0 ATS Steering Stabilizer) is compatible with both Left Hand Drive (LHD) and Right Hand Drive (RHD) models.
Jon F.
Will this fit a 2022 Mojave?
Yes, it will.
MICHAL K.
Would this fit with a aftermarket 1 5/8" mount?
The standard included tie-rod clamp is 1-3/8". An optional 1-5/8" mounting clamp is mentioned as being available for larger aftermarket tie-rods and will need to be purchased seperately.
Lee L.
Hi, what are the bolt torque spec?
55 ft/lbs - 75 ft/lbs
Edward D.
I have a Jeep JLU Rubicon 3.6 XR edition 2024 and a fox racing series 2.0 ats steering stabilizer installed. I need to move the stabilizer up so it is not the lowest thing on my Jeep as it is continuously subject to damage. Is there a relocation bracket for this stabilizer that I can use for my Jeep to move it up and out of the way ?
Yes, there are steering stabilizer relocation brackets. The one you would need would depend on the diameter of the tie rod.
Andy Q.
hi there, does this works for 2021 JT RHD please? Thx
No, it does not. Sorry for the inconvenience.
Billy B.
Will this fit a 2022 rubicon gladiator diesel thanks
Yes, it will. Thanks for your inquiry.
Joe G.
Will this fit or work for a 2021 Jeep Gladiator Mojave JT?
This is compatible with the Mojave. Thank you for the question.
Ted T.
Will this stabilizer stiffen up the steering feel?
Yes. It is intended to help better control steering shock and vibration transferred through your steering wheel that comes from running much larger and more aggressive tires. Thanks for your inquiry.