Reviews for WARN 102370 Recovery Points for 18-21 Jeep Wrangler JL with Factory Rubicon Steel Front Bumper

These work perfectly, install was pretty easy. Only issue was that shipping took a toll on the box and rendered the instructions useless and took quite a few large chips out of the paint. Luckily, Quadratec has the instructions as a PDF on the site and I was able to figure it out from there. Will post pictures when I get my d rings in.

The shipping box was all chewed up along with the instructions. One of them was scraped up down to the metal. I should have looked at the installation instructions - all 4 pages of them. It is not a simple bolt on product. You have to pull the factory steel bumper and make some other modifications.

Well made as expected. I have a UK spec JLUR with the Mopar Rubicon steel bumper with the skid plate. I need to use shackles at the front which is why I got these. However, they do not fit. You need to cut the bumper .. where two of the skid plate bolts go, and even then, you can’t refit the skid plate ... so be warned!

Poor design, like very poor design. Let me get this right, I have to cut 45% of the structural integrity of the front bumper, to mount these? Yeah, no. They could easily have "dropped" this 1 inch and no cutting of bumper required. Very disappointed in Warn for doing this. I'm returning these. Also, the pic they show of bolts mounted head out, impossissible on two bolts, no way to get deep socket on inside lower bolt, no way.