« Back to product
Ronald M.
I have a 2002 Jeep TJ with a older Warren Winch HS9500i . It has all the rollers with a wire cable i want to replace. It appears like it is 10 inches approximatly between the bolt holes. Will this Fairlead bolt up to existing holes?
Yes, the WARN Premium Hawse Fairlead will bolt directly up to your existing mounting holes.
The standard spacing for large-frame winches like your older Warn HS9500i is a 10-inch on-center bolt pattern, which matches the standard dimensions of the WARN Premium Hawse Fairlead.
Important Consideration When Switching from Wire Cable to Synthetic Rope:
Check for Burrs: Because your winch currently uses a wire cable and a roller fairlead, thoroughly inspect the winch mounting plate and surrounding areas for any sharp edges, burrs, or deep scoring left by the old steel cable. Synthetic rope can easily fray or cut if it rubs against damaged or rough metal surfaces, so you'll want a smooth contact area before installing your new fairlead and synthetic line.
The standard spacing for large-frame winches like your older Warn HS9500i is a 10-inch on-center bolt pattern, which matches the standard dimensions of the WARN Premium Hawse Fairlead.
Important Consideration When Switching from Wire Cable to Synthetic Rope:
Check for Burrs: Because your winch currently uses a wire cable and a roller fairlead, thoroughly inspect the winch mounting plate and surrounding areas for any sharp edges, burrs, or deep scoring left by the old steel cable. Synthetic rope can easily fray or cut if it rubs against damaged or rough metal surfaces, so you'll want a smooth contact area before installing your new fairlead and synthetic line.
David L.
Will this fit the Fishbone Offroad FB22088 Mid-Width Front Bumper? Adding the Warn EV10 winch.
Yes, it will.
Joe S.
What is the distance from centerline of opening to the top of the fairlead where Warn logo is displayed?
2.5". Thanks for your inquiry.
Ed S.
Will this fairlead fit the steel bumper of a JT Launch Edition?
As long as you have the factory steel front bumper then yes this will work for your Jeep.
Jay G.
Could this be use for steel cable?
No. This fairlead is designed for use with synthetic rope.
Steven L.
What is the hole spacing on this? Many have a 10" spacing however my mount is 11" on center.
These have a 10" bolt pattern.