« Back to product
Don R.
Will this fit a 2026 wrangler JLU Rubicon X? Warns literature says only 18-21 but I see some sources listing as compatible including quadratec
Yes, this part will fit your 2026 Wrangler JLU Rubicon X (equipped with the factory steel bumper).
Here is why older literature often lists an earlier cutoff range:
Unchanged Bumper Stampings: The physical geometry, bolt patterns, and mounting points of the factory steel bumper on the Jeep Wrangler JL and Gladiator JT have remained identical from their introduction in 2018 all the way through current model years.
Manufacturer Literature Lags: Warn's printed literature and older part descriptions often only reflect the vehicle years available at the time the product was initially engineered and cataloged (such as 2018–2021).
Because the factory steel bumper framework has not changed, the Warn Mid Grille Guard Tube 102350 will bolt right up using the existing factory hardware locations without any modifications needed.
Here is why older literature often lists an earlier cutoff range:
Unchanged Bumper Stampings: The physical geometry, bolt patterns, and mounting points of the factory steel bumper on the Jeep Wrangler JL and Gladiator JT have remained identical from their introduction in 2018 all the way through current model years.
Manufacturer Literature Lags: Warn's printed literature and older part descriptions often only reflect the vehicle years available at the time the product was initially engineered and cataloged (such as 2018–2021).
Because the factory steel bumper framework has not changed, the Warn Mid Grille Guard Tube 102350 will bolt right up using the existing factory hardware locations without any modifications needed.
Cyrus P.
Will this bar interfere with the adaptive cruise control? Thank you
No, it will not.
Amy T.
I have a forward-facing camera, is this bar going to be in that line of sight?
Warn makes no statement or provides images of an example. We do not have any user submitted photos along with it either, unfortunately. I would expect a pretty significant amount of blockage with it's proximity to the the forward trail cam. Thanks for your inquiry.
Stephen F.
What are the dimensions underneath the grille guard? Trying to see if these will fit LP6s underneath them.
The measurement from the top surface of the bumper to the bottom of the tube is 9.84". Thank you for the question.
Alfredo G.
Will this fit a Gladiator Sport factory bumper? Ot just the Rubicon?
It will fit either model as long as it is the factory steel bumper and Not the factory plastic bumper.
Michael N.
Will the mid height version block the Rubicon Trail Cam?
This grille guard will partially block the view of the trail cam.
Aaron W.
Can this grille guard also be used on the stock (plastic) bumper on the 2021 Wrangler Sport S? I realize holes would need to be drilled into the bumper, but would it fit otherwise? If not, is there a similar product for the non-steel bumpers? Thanks.
Mounting this to the stock plastic bumper would not be adequate to prevent it from possibly falling off. I would not recommend it. We do not have one that mounts to the plastic bumper. With that said, we offer bars such as part numbers 12151.0008 or 12151.0011 that will work with your factory plastic bumper.
Carolyn H.
I was going to get this, but then I don't think I would be able to reach the hood latch to open it.
The hood latch will still be easily accessible once this grille guard is installed.