« Back to product
Jeff K.
After I install for the first time, how long will it take to remove? How about re-install? If I remove, can I put the hardtop and/or the soft top on or will I need to remove installed parts as well?
Initial Installation Time: The very first time you install the Mopar Sun Bonnet, it typically takes about 30 to 45 minutes. This involves getting the header channel positioned, properly aligning the straps/anchor points, and evenly tensioning the fabric for a snug, wrinkle-free fit.
Removal Time: Once the initial setup is done, subsequent removal is very fast—taking only about 5 to 10 minutes to unbuckle, loosen the straps, and detach the top.
Reinstallation Time: Putting it back on after the initial fit takes roughly 10 to 15 minutes, since the underlying header and strap adjustments are already mapped out.
Hardtop and Soft Top Compatibility: You cannot put the factory hardtop or a full soft top back on while the sun bonnet is installed. Because the bonnet utilizes the header channels and anchor points required by factory top seals and latches, you must completely remove the sun bonnet and its mounting hardware before reinstalling a hardtop or full soft top.
Removal Time: Once the initial setup is done, subsequent removal is very fast—taking only about 5 to 10 minutes to unbuckle, loosen the straps, and detach the top.
Reinstallation Time: Putting it back on after the initial fit takes roughly 10 to 15 minutes, since the underlying header and strap adjustments are already mapped out.
Hardtop and Soft Top Compatibility: You cannot put the factory hardtop or a full soft top back on while the sun bonnet is installed. Because the bonnet utilizes the header channels and anchor points required by factory top seals and latches, you must completely remove the sun bonnet and its mounting hardware before reinstalling a hardtop or full soft top.
Harold N.
Will this fit with mopar grab handles installed?
Yes, they will allow the use of the Mopar grab handles. Thanks for your inquiry.
Ernest W.
How do you install it if you have a padded roll bar? The snaps locations are under the padding
For installation assistance please contact our sales team at 1-800-745-5337
Ernest W.
Will this top work with padded roll bar?
No, it will not. This is designed to work with factory trim only.
Rosie S.
Is there a model that fits a 2 door of the same year or can this be applied to a 2 door?
Please Click Here for the 2-Door version
Kimberly M.
Can this stay on when re-installing a hard top? Or does this have to be removed?
It must be removed for reinstalling the hard top or soft top.
Maurizio G.
Hi Guys, will it work under the power roof? I wish to buy the mesh one to use it once the roof will be open.. thanks
No it will not work with the Sky Top