Skip to main content
Home » Jeep Bumpers » Front Bumpers » Front Modular Bumpers » Quadratec Modular Winch Ready Front Bumper
« Back to product
Will this fit on a 2017 Jeep Wrangler Unlimited Rubicon with the electronic sway bar disconnect? Does the bumper interfere with the factory electronic sway bar disconnect? What skid plates will fit with this bumper?
Yes, it will fit Rubicon models. We have not tested skid plates but it looks like a Quadratec sway bar skid appears likely to fit. Thanks for your inquiry.
Are the d rings capable for towing with a motorhome
No, they are not. The d-ring mounting tabs should be used for recovery circumstances only. Thanks for your inquiry.
Is there a bracket to install a front license plate on this bumper?
No. We suggest use of fairlead mounted license plate brackets. Holes should not be drilled into the bumper for mounting another style of specific bracket. Thanks for your inquiry.
Is this bumper compatible with Item#97109-0018
No, it is not. It will accept fog lamps for factory plastic bumper designs or aftermarket 4 bolt mount fog lamps. Thanks for your inquiry.
I have a quadratec bumper just like this on my JK. Do you have a 2 inch front receiver hitch that is compatible (for me to attached a plow) or do I need to reinstall my factory bumper? Thanks
Testing has not been run with front end receivers. That said, the mounting points on the blocker beam that most front end Jk receivers use, do not look badly obstructed, so I would surmise that the use of a front end receiver is likely quite possible. Sorry we cannot definitively state.
Do you sell a winch cover plate for this bumper.
Sorry, but we do not. Apologies for any inconvenience.
What size light bar can mount on the two fog light brackets? I cannot find any specs on the distance between the two brackets.
21.5" approximately from center to center of the slotted aux light mount brackets. It should accommodate light bars from 18"-24" depending on the adjustability of the brackets supplied with a light bar that is sold separately. Thanks for your inquiry.
What front license plate holders will mount on the Quadratec Modular Winch Ready Front Bum[er?
We suggest use of fairlead mounted license plate brackets. Holes should not be drilled into the bumper for mounting another style of specific bracket. Thanks for your inquiry.
Hello, Was thinking about purchasing this modular bumper with the Q10,000s Winch, should I be concerned with the added weight and will it cause my 2017 Jeep Wrangler Willys front end to droop? I appreciate any feedback you can give me. Thank you.
There may a little added nose dive or rake, but up to 3/4 coil spring spacers can safely be used and bring the front end up some. Thanks for your inquiry.
Do you have a winch delete plate for your modular front bumper model number 12057-0210 ?
Sorry, but one is not offered. Thanks for your inquiry.