Reviews for Mopar 82215428 Auxiliary Light Mount Brackets for 18-21 Jeep Wrangler JL & Gladiator JT

Brackets appear to be high-quality and look very clean with KC 6" driving lights. The product description is a bit misleading though. It claims to "use existing holes for a no-drill solution" -- it's true that you use existing holes in the frame, but you definitely need to drill them out in order to mount the brackets. Fortunately I read through the installation instructions before purchasing and was prepared for this.

Great bracket for mounting fog lights. Clean and it makes it look it came from the factory. Need to have the right tools and a bit intermediate skills to get it done right.

Assembly is a bit involved. Took about 3 hours, but I was very particular about where I ran the wiring. A word of caution ....... The 6" Apollo lights will NOT mount on these in a satisfactory manner because where the wiring exits the light it sits exactly on one of the grille ribs. This prohibits the light from adjusting high enough to be useful. Unless you are wanting light directly in front of the Jeep this is a problem. Smaller lights might or might not work fine. Highly suggest you do your homework and ask around before purchasing lights for these mounts.

Good product, good quality, complicated installation since you need to drill on the frame and cut some OEM parts.

This is not a direct bolt on - you need to drill the frame and cut or dispose of part of the bumper cover