Reviews for Quadratec Pre-Runner LED Light Bar Kit for 07-18 Jeep Wrangler JK
I am very satisfied this item.
I could instal for export model which is right side handle. From Japan.
Definitely a supercool addition to your Wrangler. Installed mine today. I forgot to tap them on driver's side and ended up wiring on passenger's side (still works).
I had to unscrew headlamps for easy access while routing wires. No big deal.
Takes a little work, but it's possible to make the lights work even with a hood lock. Used lane zip ties at 2 3/4 inch hole spacing and augmented with a large zip tie through the hood lock to stabilize. Make sure you use black.Will try to upload photos
Love the product. The description mentioned not compatible with grill inserts. I have the Hooke black honeycomb inserts and used a Dremel tool to open up a couple of the holes and it worked great. Didn't use the bracket that came with the kit. Used zip ties to secure the wiring harness in place and it looks amazing.
Fantastic, just gives it a different look.
These look great. Just make sure you are plugging the pre runner harness into the MARKER light (very outside connector inside the top of the fender), and NOT the parking light connector. It will not fit the parking light connector on a JK.
A nice feature for that added look and visibility. Very easy to install, too.
Easy to install (once I read instructions to side marker light and not front directional) and great look.
Nice product, easy install, cool look. I went a little custom and mounted my in grill inserts and used the middle three grill openings--my winch mount has lights that would have blocked the outside bulbs otherwise. Great install instructions at
https://www.youtube.com/watch?v=Jipy8DPqatw
Easy to mount... definitely plug and play! Had the kit installed in just under 20 minutes. Great bang for your buck on a cool aftermarket look.