« Back to product
Nick C.
Will these set off error or warning messages on our display ?
The Diode Dynamics DD0341 Switchback LED Turn Signals will potentially trigger a "bulb out" warning and hyperflashing on your display if installed without the proper electrical correction.
Because the Wrangler JL Sport is designed to monitor for the specific power draw of a halogen bulb, the lower energy consumption of these LEDs can cause the vehicle’s computer to assume a bulb has failed.
The DD0341 kit is specifically designed to address these issues in two primary ways:
Included Resistors: The package includes load resistors that you must splice in-line. These resistors mimic the power draw of the original halogen bulbs, satisfying the computer and eliminating both the dash error and the fast-flashing turn signals.
Software Correction: If you prefer not to splice your wiring, you can use a programmer like the Superchips Flashcal+. This tool allow you to change your Jeep’s computer setting to "LED Mode," which stops the system from checking for that specific high power draw.
Because the Wrangler JL Sport is designed to monitor for the specific power draw of a halogen bulb, the lower energy consumption of these LEDs can cause the vehicle’s computer to assume a bulb has failed.
The DD0341 kit is specifically designed to address these issues in two primary ways:
Included Resistors: The package includes load resistors that you must splice in-line. These resistors mimic the power draw of the original halogen bulbs, satisfying the computer and eliminating both the dash error and the fast-flashing turn signals.
Software Correction: If you prefer not to splice your wiring, you can use a programmer like the Superchips Flashcal+. This tool allow you to change your Jeep’s computer setting to "LED Mode," which stops the system from checking for that specific high power draw.
Wayne V.
On these switch back it does turn into a additional drive light ? Also what part number do I use for a 2020 JL Sahara unlimited?
Yes, the Diode Dynamics DD0341 Switchback LED Turn Signals do function as an additional white driving light (DRL - Daytime Running Light) when your headlights are on, and then switch to bright amber when the turn signal is activated. This creates a modern dual-color effect.
For your 2020 Jeep JL Sahara Unlimited, you will likely need the 7443 HP24 Switchback LED bulbs.
David T.
Will this product work for a 2020 Willys?
Yes, it will.
Mark H.
Will these work on a Sport S Gladiator?
Yes, this part number DD0341 will work for the Gladiator JT as well as the 18-20 Wrangler JL Sports. The Sahara and Rubicon models split the DRL and Turn signal so this part number would not work for those trims. For Sahara and Rubicon models you will want to use DD0421 (stage 1) or DD0422 (stage 2). These kits contain the DRL bulb and turn signal.
Terry W.
Does this include both L & R lights?
Yes, this turn signal kit does include both left and right sides.
Luke W.
Will these work on a JL Sahara without the led package
No, these are designed for the Sport model.
Tony D.
Will these work for 2020 JT Rubicon?
No, these are designed for the sport model. Please see link below for your Jeep Gladiator JT Rubicon application...
https://www.quadratec.com/p/diode-dynamics/switchback-front-turn-signal-and-drl-kit-jeep-wrangler-jl-rubicon-sport-sahara-gladiator-jt
Ryan K.
Will these work on a JL Rubicon without the factory LED package?
No.