Reviews for Rugged Ridge 13550.23 Armis Hard Rolling Bed Cover for 20-22 Jeep Gladiator JT

Directions incorrect. Not sure how anyone rating this could do install. Contacted rugged ridge and they admitted install info is wrong, and they had no answer as to how the cover should be installed. Instructions for installing the bulkhead seal and some kind of foam block are in direct conflict with each other. Pictures for the 2021 gladiator foam block install do not even show the gladiator bed. Also the 1/4 x 20 jack nuts shipped with the mounting brackets to mount to the front of the bulkhead are very weak. Twisted one off trying to tighten down with a screwdriver. I ordered rivitnuts from Amazon and will install with real rivet nuts. Quadratech also had no answers. Also not this cover is getting bad reviews on many other sites, just not Quadratec for some reason.

Not worth the money. Does not fit the gladiator bed well. End by tailgate requires rails to actually be inside the dimensions of the truck bed rails to latch the end down. You can see the crack between rails and truck bed. Latching system seems flimsy. Does not line up with the sides of the bed at all. Horrible experience with installation. Had to go buy different bolts to install as the head of the tork drive bolts immediately stripped out. Spent almost 3 hours installing something that should have been simple. One of the rails out of the box came with the foam seal stuck to the cardboard box which tore off the rail and tore apart the seal. All said and done does not seem like a product that cost $1000 +. if I had to do over would find a different cover.