« Back to product
Wayne R.
Will this leveling kit raise the front end of a Gladiator 2.5 inches?
No, the Teraflex 1.5” Performance Spacer Leveling Kit (1155300) will not raise your front end by 2.5 inches. As the name suggests, it is designed to provide exactly 1.5 inches of front lift.
This kit is "modular," meaning it includes two different sets of spacers that are stacked together to achieve the final height. If you were to install only one part of the kit, you would get even less lift, but you cannot safely exceed the 1.5-inch total using just these components.
This kit is "modular," meaning it includes two different sets of spacers that are stacked together to achieve the final height. If you were to install only one part of the kit, you would get even less lift, but you cannot safely exceed the 1.5-inch total using just these components.
ROBERT D. Y.
Will this fit Gladiator Mojave X
The Teraflex 1.5” Performance Spacer Leveling Kit (Part #1155300) is not recommended for the Jeep Gladiator Mojave trim.
John F.
Will the factory electronic swaybar disconnect still work with this leveling kit?
Yes, your factory electronic sway bar disconnect will still function perfectly with the Teraflex 1.5” Performance Spacer Leveling Kit.
OLIVIER R.
Hello, I have a 2021 Gladiator Overland on which I installed an AEV 2.5 Dual Sport lift kit.
Can I install this additional kit to correct the leveling problem at the front?
Thank you
It is not recommended to stack the Teraflex 1.5” Performance Spacer Leveling Kit on top of your existing AEV 2.5" DualSport Lift Kit.
While it is physically possible to fit spacers on top of lift springs, doing so on a Gladiator that already has a 2.5-inch lift creates several safety and performance issues. Driveshaft angles, caster & steering, and shock overextension will all be impacted.
While it is physically possible to fit spacers on top of lift springs, doing so on a Gladiator that already has a 2.5-inch lift creates several safety and performance issues. Driveshaft angles, caster & steering, and shock overextension will all be impacted.
Ryan F.
Will this work for the Mojave
Yes, it can be used on the JT Mojave.
M M.
I have a 2020 Jeep Gladiator Sport S is this the size of leveling kit I need to take the rake out of my Gladiator. Also is there anything else I need to do or will my stock suspension work fine
Yes, this would be the correct leveling kit for you. All instructions will be included with the item, but, no there are no other suspension modifications needed.
Greg H.
Why won’t these fit a 2024 JL unlimited…every other leveling kit seems to be for both…I need a I.5 leveling kit with bump stop spacers or larger bump stops…
This part is for The 20-24 Jeep Gladiator JT. For the JLU you'll want part number 16190-7001 for the 1.5" spacer lift.
Devin B.
Can you add this to the AEV 2inch spacer lift to eliminate the rake in the front?
Stacking of spacer lift systems is not advised. Sorry for any inconvenience.
Nate H.
Link to the Rear Bump Stop Strike Pad Extensions that it talks about in the description?
Click Here for the Teraflex 1959300 1/2" Bump Stop Strike Pad Shim Kit
Oran D.
Will the Teraflex 1155300 1.5”Preformance Spacer Leveling Kit level out my 2021 Gladiator Mojave ( will it make the front level with the back) in other words take the factory rake out of the front and make it level with the back end.?
The kit provides the option to level 1" or 1.5" of added front height to attain your preferred amount of rake. Use of both front spacers will level the Gladiator Mojave unless you have a lot of excess front end weight from a winch bumper. Thanks for your inquiry.