« Back to product
David W.
Can you please provide the dimensions of the light mount surface and hole spacings.
The Quadratec JL-LMB Heavy-Duty Auxiliary Light Mount Brackets are designed for maximum versatility by providing a wide range of horizontal adjustment rather than fixed holes.
Mounting Surface & Spacing Dimensions
Adjustment Range: The unique slide-and-bolt design allows you to position your lights anywhere from 10 inches to 23.5 inches apart (center-to-center).
Specific Fitments:
Narrow Setting: Approximately 15 7/16 inches center-to-center.
Wide Setting: Up to 23.5 inches center-to-center.
Mounting Surface: These brackets are constructed from 3/8-inch hot-rolled structural steel, providing a thick, stable platform that virtually eliminates light vibration on rough terrain.
Capacity: The surface and spacing are designed to accommodate two auxiliary lights up to 8 inches in diameter or a single 20-inch bottom-mount light bar.
Mounting Surface & Spacing Dimensions
Adjustment Range: The unique slide-and-bolt design allows you to position your lights anywhere from 10 inches to 23.5 inches apart (center-to-center).
Specific Fitments:
Narrow Setting: Approximately 15 7/16 inches center-to-center.
Wide Setting: Up to 23.5 inches center-to-center.
Mounting Surface: These brackets are constructed from 3/8-inch hot-rolled structural steel, providing a thick, stable platform that virtually eliminates light vibration on rough terrain.
Capacity: The surface and spacing are designed to accommodate two auxiliary lights up to 8 inches in diameter or a single 20-inch bottom-mount light bar.
Jeremy B.
Will a winch prevent these from being functional?
No, you'd still be able to install and use a winch with these lights.
Eric O.
will these fit the 2022 392 Wrangler?
Yes they will. They should have no fit issues or concerns on Rubicon 392 models. Thanks for your inquiry.
Tim R.
Will this fit the Mojave?
They should fit Mojave models trouble free. Thanks for your inquiry.
Aurelio P.
Will this fit a 2018 wrangler jk ? Don’t see why it wouldn’t.
No, it will not, but this model we offer for JK models will. JK Auxiliary light mounts. Thanks for your inquiry.
Henry A.
I'm looking to mount ARB Intensity Solis 21 (ARB PN SJB21SKIT) on a 2021 Gladiator. Will these work?
We have not tested this model light, but there is no obvious reason that there would be conflict. The light is a large one and may block some air flow a good bit, but they should fit. Sorry we cannot state with absolute certainty. Thanks for your inquiry.
Antonio Z.
Will this product work if I have the Mopar bumper rubicon bumper?
While not specifically tested, the engineers do believe they will work with bumper options available from factory. Thanks for your inquiry.
Myron K.
Will this work with a jl rubicon steel bumper?
While not specifically tested, product engineering does feel it should have a good likiehood of fit in the same way they do for plastic stock bumper.
Hampton G.
What size lights will fit on these brackets? Been looking at Baja Design LP6 which are just around 3.5” deep.
These brackets will allow around 2.5 to 3" of space in front of the grille and on that model light it is 1.697" stem to back of the light so you should be plenty clear with that choice. Thanks for the inquiry.
Manne S.
Hi,
What size is the middle mounting hole (largest size bolt the lights can have)?
Quadratec JL-LMB Heavy-Duty Auxiliary Light Mount Brackets for 18-21 Jeep
Thanks, Manne
Hi there, The unit includes 1 3/4" stainless carriage bolts so that should be the size of the middle mounting hole.