Reviews for Quadratec JL-LMB Heavy-Duty Auxiliary Light Mount Brackets for 18-25 Jeep Wrangler JL & Gladiator JT

First off I like the brackets for the fact there is no drilling and you can adjust location.
Negatives are that they are truly designed for JL Wrangler without E-Torque because of the two radiators behind the grill. The 48 volt lithium has its own cooling system that gives you know room to put nuts on back side. I made it work by buying my own screws and nuts that I could tighten from the front, but this should either be noted in description or designed with nuts you can tighten from the front. Description says simply for JL Wrangler up to 2025. So just be aware that if you have E-Torque, you will have to slightly modify.

Sturdy mounting bracket and super great that it is made in USA but this Aux. light bracket will not work on a 2021 JLU if you have a Winch mounted in the Bumper, like in the stock Mopar Steel bumper on a Rubicon. Bracket hits the winch even at the widest possible mounting locations. Fitment shows that it fits 2021 JLUs but does not specify that does not fit is a winch is mounted.

Well built product,
HOWEVER!!
It is nearly impossible to fit onto a model with multiple radiator coil stacks such as a 2023 High Tide. One of the radiators had to be unscrewed, shifted up, and it still did not have sufficient clearance to articulate the mount behind the support bar unless you forcefully push the middle radiator back in the process. This should be mentioned in the product description.
Definitely see how many radiator stacks you have before purchasing.

This does not fit a 2021 JL Willys 2 door. Attempted multiple times to install behind the support bar but the radiator stack is too close to the bar to allow for the install bracket to swing behind the bar. The only way it appears to install on a 2 door at this point is to remove the entire front bumper to get it under the bar or to remove the support bar itself.