« Back to product
John W.
What is the tube size? I've got a v6 and want to buy pre-filter head.
The AEV Snorkel tube for the JL Wrangler and Gladiator JT uses a 4-inch diameter inlet.
When looking for a pre-filter head (such as a Sy-Klone or Donaldson pre-cleaner) for your V6 setup, you will need to select a model sized specifically for a 4-inch (1016mm) intake opening.
When looking for a pre-filter head (such as a Sy-Klone or Donaldson pre-cleaner) for your V6 setup, you will need to select a model sized specifically for a 4-inch (1016mm) intake opening.
Donald Y.
Can this be used with a light bar mount?
Yes, but not out of the box without modifications.
Because the AEV snorkel and standard A-pillar or overhead light bar mounts (such as KC or Rigid brackets) compete for the exact same mounting space on the lower driver-side windshield hinge/A-pillar area, they interfere with each other.
To run both, you typically need to:
Use longer hardware to account for the stacked brackets.
Custom-trim or notch the AEV snorkel's mounting bracket so it shares the foot-print cleanly with the light bar mount.
Because the AEV snorkel and standard A-pillar or overhead light bar mounts (such as KC or Rigid brackets) compete for the exact same mounting space on the lower driver-side windshield hinge/A-pillar area, they interfere with each other.
To run both, you typically need to:
Use longer hardware to account for the stacked brackets.
Custom-trim or notch the AEV snorkel's mounting bracket so it shares the foot-print cleanly with the light bar mount.
Alex Y.
Will it fit into 2024 wrangler 2door 3.6 but it has mopar cold intake box 77072433ac ( quadratic # 17001-2091)?
No, it will not fit without modification.
The AEV snorkel kit requires a specific intake connection designed for the factory airbox. Because the Mopar cold air intake box changes the shape and routing under the hood, the AEV snorkel's transition adapter will not directly line up or seal properly to that aftermarket box.
The AEV snorkel kit requires a specific intake connection designed for the factory airbox. Because the Mopar cold air intake box changes the shape and routing under the hood, the AEV snorkel's transition adapter will not directly line up or seal properly to that aftermarket box.
Michael N.
Will the AEV snorkel fit on a 2022 Jeep JLU 3.6 E torque WITH the Genesis dual battery system? I saw a post where someone said it wouldn't.
No, they are not compatible out of the box.
The AEV snorkel's internal air routing/adapter tube runs directly through the factory auxiliary battery location on the passenger side inner fender. Because the Genesis dual battery system relocates and expands the battery setup into that exact space, it creates a physical interference conflict with the AEV snorkel ducting. Extensive custom modification would be required to make them fit together.
The AEV snorkel's internal air routing/adapter tube runs directly through the factory auxiliary battery location on the passenger side inner fender. Because the Genesis dual battery system relocates and expands the battery setup into that exact space, it creates a physical interference conflict with the AEV snorkel ducting. Extensive custom modification would be required to make them fit together.
Jaume P.
Will this fit a 4xe rubicon? I the high fender the right option?
Yes. This AEV Snorkel System was engineered for use with both JL Wranglers and JT Gladiators. It is compatible with the 2.0L, 3.6L, and 2.2L CRD engines, however, it will not work with the 3.0L EcoDiesel, 3.0L diesel engine, or the Mojave edition Gladiator JT.
Melissa E.
Will this fit a 2022 Wrangler Rubicon 4xe? It has a light bar and tubular fender flares.
Yes, it would. Installation Note: The AEV Snorkel System is NOT compatible with the 3.0L diesel engine or the Mojave edition Gladiator JT.
William H.
Will this fit on a JT with standard flares if the Oracle Sidetrack lighting is installed?
Sure, it shouldn't interfere. Thanks for your question.