« Back to product
Joe W.
Can I take this on and off my jl or should it be left on
The Quadratec Aluminum Roof Rack is designed to be left on permanently as a structural, bolt-on addition to your Wrangler JL.
Because it mounts directly to the vehicle's body/tub and sport bar support structures rather than using a simple clamp-on crossbar setup, removing and reinstalling it is a labor-intensive, multi-step process involving multiple hardware points. While you can unbolt it if you truly need to take it off for seasonal clearance or hard top removal, it is not engineered for quick, on-and-off daily or weekly removal.
Because it mounts directly to the vehicle's body/tub and sport bar support structures rather than using a simple clamp-on crossbar setup, removing and reinstalling it is a labor-intensive, multi-step process involving multiple hardware points. While you can unbolt it if you truly need to take it off for seasonal clearance or hard top removal, it is not engineered for quick, on-and-off daily or weekly removal.
Robert T.
How can i mount a hi lift jack to this roof rack?
We have several options. You can see and pick the best one for you here: Jeep Cargo Rack Accessories
Robert C.
Would this affect the functionality of a hardtop equipped with a soft top Sunrider?
Yes, the Sunrider would not lay flat when you fold it back.
John S.
Can this rack support loads that run across the rails (vs inside) such as lumber (a few boards, not like a truck bed full or anything like that) or kayaks? if so, is there weight limit for this type of use? Thanks!
Testing of load distribution on top of the rack rails has not been performed. If the weight is near capacity, it will just be important to take every measure the the load is distributed as equally as possible. Thanks for your inquiry.
Anthony B.
Will this roof rack fit 2023 jeep 4xe Rubicon 4 door ?
If you are equipped with a factory hardtop, it will fit. Thanks for your inquiry.
John B.
Can a light bar be installed in the front? Do you have the dimensions?
Yes. It will be best fit with 20", 30" & 40" light bar varieties or any single style stem mounted auxiliary light. Thanks for your inquiry.
Robert T.
Are there any places to mount the quick fist rubber mounts on this rack?
Not directly but with some minor modifications and drilling, I'm sure quick fist clamps could be used on some areas of the rack. Thanks for your inquiry.
Eric R.
Can I keep this connected to the roof while I take the roof off or do I need to remove the rack first?
It should be removed from the hardtop prior to removing your hardtop from the Jeep. Thanks for your inquiry.
Ronald M.
On the aluminum roof rack for the JL, how does it fit on the two door? Does it cover the freedom panels, will it allow me to remove them? Or those it fit like it does on the four door? Thanks!
Similar to in the case of JT Gladiator the front rack mounts would mount to the back portion of the freedom panel, preventing the panels from being removed, while the rack is in use. Sorry for any inconvenience. Thanks for your inquiry.
Robert F.
Does Rotopax make a mount that will successfully attach to you roof rack?
Not directly but with minor drilling it could certainly be made to work out with Roto-Pax mounts. Thanks for your inquiry.