Skip to main content
Home » Jeep Lighting, Lenses, Bulbs » Auxiliary Lighting » Auxiliary LED Lighting » Oracle Lighting Rear Bumper LED Reverse Lights
« Back to product
Can these backup lights be connected to the 7 wire factory trailer connector?
Yes, they can be wired into the 7-wire factory trailer connector by tapping into the center reverse pin (typically the center auxiliary/reverse terminal wire, usually purple with a white stripe), though most installers prefer tapping directly into the factory tail light reverse wire harness behind the driver-side tail light for a cleaner and more direct connection.
Will this kit work on a 2024 Rubicon 4xe w/ steel bumper? If so, does the bumper need to be removed for the install? Thanks.
Yes, these will work on your bumper. We'd absolutely recommend you remove the bumper for install. It'll be a pretty tight space.
Will these fit the 24 Rubicon bumper?
In the plastic molded Rubicon bumper option, yes they will. Thanks for your inquiry.
Salve sto guardando le luci retromarcia al posto dei catarifrangente volevo sapere se potevano mandare nel mio wrangler jl . Se possibile volevo inviare una foto . Grazie
Puoi inviare tramite e-mail una foto e il tuo numero vin a [email protected] e possiamo tentare di trovare un'applicazione compatibile adeguata per l'illuminazione che desideri aggiungere. Grazie per la vostra richiesta.
Can I tap these into the Oracle black series LED tail lights?
No. They need to be wired into the factory reverse light harness. Thanks for your inquiry.
how many amps do these lights draw? I intend to connect them to the aux switches which are 40A and 15A. i would guess i can use aux 3 or 4. which are the 15amp switches.
Oracle states each lamp has less than 3 amps draw, so that should be well with the capacity of the Aux switches.