Reviews for Rugged Ridge 11504.33 XHD Rock Sliders for 18-23 Jeep Wrangler JL 2-Door

Look great, well made for the 2 door Rubicon to replace standard sliders. Paired with Carnivore tube doors. Did have an installation issue on the drivers side; the pinch weld bolt was just barely long enough to get a nut started. It could be a Jeep issue where the weld was not perfectly parallel as compared to the other attachment points. The weld did pull in as the nut was tightened.

Great fit, strong, and look fantastic. Easy enough to mount.

Easy Install, I just removed the OEM rock slider by removing the body bolts (13mm socket) then the small nuts (10mm socket). Hold the slider in place while removing the final nuts. Then just pull it off. The Rugged Ridge side step has 4 studs that go into the existing holes. Just hold it in then start 2 of the nuts and finish installing the nuts and tighten them to pull the side step/slider close to the body (you will see the rubber seal compress slightly) then tighten the body bolts. took maybe 1 hr total, including opening the box. Great look, super strong, these will protect any jeep and provide some footing to help entry & exiting the Jeep.

These rock sliders arrived today. I was disappointed when i open the box they arrived in. They had scratches on them that were noticeable. The driver side one was slightly bent too. I had to either pay shipping to return them or attempt to fix them. I chose to fix them. Should have to fix a product you pay alot of money for. Once I installed them they fit well. Easy to install took about 30 mins.